Which formulas shows the relationship between momentum, mass and velocity

2KOH + H2SO4 = K2SO4 + 2H20

From the reaction, it can be seen that KOH and H2SO4 have the following amount of substance relationship:

n(KOH):n(H2SO4)=2:1

From the relationship we can determinate required moles of H2SO4:

n(KOH)=c*V=0.15M*0.025L= 0.00375 mole 

So,

n(H2SO4)=n(KOH)/2= 0.00375/2= 0.00188 moles

Now, when moles of H2SO4 is known, concentration can be calculated: 

c(H2SO4)=n/V= 0.00188mole/0.015L= 0.125M

The statement best describes the role of the sun in creating wind is "The energy of the sun heats the land and water surfaces unevenly, creating wind".

Wind is the movement of air. Sometimes it is fast and sometimes it is slow.

It happens because of pressure differences and it is caused by temperature differences. It is caused by uneven heating of air due to earth's own rotation.

Given options for the role of sun in creating wind are-

The rays of the sun push the air in all directions, creating wind.

The radiation of the sun reacts with water over the ocean.

The energy of the sun heats the land and water surfaces unevenly, creating wind.

The energy of the sun directly heats the gases in Earth's atmosphere, creating wind.

Therefore, The statement best describes the role of the sun in creating wind is "The energy of the sun heats the land and water surfaces unevenly, creating wind".

Learn more about wind on:

https://brainly.com/question/12005342

#SPJ3

Answer:

The an swer is A) on usa testprep

Explanation:

The bear population would grow. If there are more trout, there will be more food for the bears.

In this exercise we will have to explain the transformation of energy in cellular respiration, as:

The type of energy transformation takes is chemical energy and the energy is conserved because The ATP molecule stores energy from cellular respiration and photosynthesis for immediate consumption.

Recalling how cellular respiration works we have:

Energy is stored in the bonds between phosphates. The molecule acts as a cellular currency, that is, it is a convenient form of energy transformation. The ATP molecule stores energy from cellular respiration and photosynthesis for immediate consumption.

See more about cellular respiration at brainly.com/question/18477177

During cellular respiration, chemical energy in glucose is converted to ATP, conserving energy efficiently across glycolysis, the Krebs cycle, and the electron transport chain. Energy conservation ensures no net loss of matter or energy, illustrating a fundamental principle of biology where substances can change form but are never lost.

During cellular respiration, the type of energy transformation that takes place involves converting the chemical energy stored in glucose into a form that cells can use, primarily adenosine triphosphate (ATP). This process begins with glucose and oxygen being transformed into carbon dioxide, water, and energy. The conservation of energy during cellular respiration occurs through a series of biochemical reactions that extract energy from glucose and transfer it to ATP, which cells utilize for various functions. The overall process encompasses three main stages: glycolysis, the Krebs cycle (or citric acid cycle), and the electron transport chain.

In cellular respiration, there is no net loss of matter or energy as they are both conserved. Glucose, upon oxidation, releases its energy in a controlled manner through several steps. This released energy is captured in the form of high-energy phosphate bonds in ATP. ATP then serves as a versatile energy currency for the cell, enabling it to perform various tasks such as muscular contractions, nerve impulses, and biosynthesis. The efficiency of this process means energy is conserved within biological systems, maintaining life processes without waste.

The four phases of cellular respiration are:

https://brainly.com/question/29760658

#SPJ3

Answer: Temperature

Explanation: Average kinetic energy is defined as the average of the kinetic energies of all the particles present in a system. It is determined by the equation:

[tex]K.E=\frac{3RT}{2}[/tex]

K.E= Average kinetic energy

R= gas constant

T= temperature

From the equation above, it can be seen that kinetic energy is directly related to the temperature of the system. So, if temperature is more, average kinetic energy of the system is more and vice-versa.

Thus average kinetic energy of the particles in an object is related to temperature.

The new volume of 10.0 liters of H2(g) heated to 546 K is 20.0 liters, calculated using Charles's Law.

To calculate the new volume when 10.0 liters of H2(g) at standard temperature and pressure (STP) is heated to a temperature of 546 K, we can use the ideal gas law in the form of Charles's Law, which states that the volume of a gas is directly proportional to its temperature, assuming pressure and the amount of gas remain constant.

The formula for Charles's Law is:

V1/T1 = V2/T2

Where V1 is the initial volume, T1 is the initial temperature (273 K at STP), V2 is the final volume, and T2 is the final temperature.

Plugging in the values:

10.0 L / 273 K = V2 / 546 K

By cross-multiplying and solving for V2, we get:

V2 = (10.0 L × 546 K) / 273 K

V2 = 20.0 liters

The new volume of H2(g) when heated to 546 K is 20.0 liters.

Final answer:

The new volume of H₂ gas at STP when heated to a temperature of 546 K is 20.0 liters.

Explanation:

To determine the new volume of H₂ gas at STP when heated to a temperature of 546 K, we can use the combined gas law equation:

V₂ = (P₁ × V₁ × T₂) / (P₂ × T₁)

Given that the initial volume (V₁) is 10.0 liters and the initial temperature (T₁) is 273 K (STP), we can substitute these values into the equation along with the given final temperature (T₂ = 546 K), and the pressure at STP (P₂ = 760 mm Hg). Solving for V₂, we get:

V₂ = (760 mm Hg × 10.0 L × 546 K) / (722.2 mm Hg × 273 K) = 20.0 liters

Therefore, the new volume of H₂ gas at STP when heated to a temperature of 546 K is 20.0 liters.

In a study exploring the effects of attendance on student grades in science class, attendance would be the independent variable as it's the factor being manipulated, and the student grades would be the dependent variable as they are potentially affected by attendance. A possible hypothesis could be: 'Regular attendance in science class leads to higher grades for students.'

In a scientific study targeting the influence of attendance on student grades in science class, the independent variable (IV) would be the attendance, representing the factor that can be manipulated or that changes naturally. The dependent variable (DV) on the other hand, would be the student grades, as these are potentially influenced or changed by the attendance rate.

A possible hypothesis could be: 'Regular attendance in science class leads to higher grades for students.' This hypothesis suggests that if a student frequently attends their science class (IV), then their grades (DV) might improve.

https://brainly.com/question/33919877

#SPJ3

Because of hydrogen bond, ice is less denser than liquid water.

When water freezes, the water molecules form a crystalline structure by hydrogen bonds. An ice is less denser than liquid water, because the orientation of hydrogen bonds causes molecules to push farther apart, which lowers the density.

Hence, option b is the answer.

To learn more about hydrogen bond here

https://brainly.com/question/8881698

#SPJ2

Answer : The approximate number of milliliters in 3 tbsp will be, 45 milliliters

Explanation :

Using the unitary method :

According to the question,

As, 1 tablespoon is present in 15 milliliters

So, 3 tablespoon is present in [tex]\frac{3\text{ tablespoon}}{1\text{ tablespoon}}\times 15\text{ milliliters}=45\text{ milliliters}[/tex]

Therefore, the approximate number of milliliters in 3 tbsp will be, 45 milliliters

Ans :4.5 * 10²³ molecules

Given:

Moles of CH4 = 0.75

To determine;

The number of molecules of CH4 in 0.75 moles

Explanation:

1 mole of CH4 contains Avogadro's number i.e. 6.023*10²³ molecules

Therefore, 0.75 moles would correspond to :

= 0.75 moles * 6.023*10²³ molecules/1 mole

= 4.5 * 10²³ molecules

Answer:

4.5

Explanation:

Answer: The highest pressure is at the bottom

Explanation:

I got it right

We know that

Kp = Product of partial pressures of products / product of partial pressures of reactants

For given reaction

Br2(g) + Cl2(g) ↔ 2 BrCl(g)

Q = p^2BrCl / pBr2 X pCl2   [Q= reaction quotient]

now as given that there is only BrCl in the container so the pressure of BrCl will be only pressure to be accounted

Hence

Q= (0.5)^2 = 0.25

Now as Q > Kc The reaction will move in backward direction or left side or reactant side s

so answer is

Q > K and the reaction moves to the left

The reaction will  B) move to the left since Q > K.

The equilibrium constant, K, describes the reaction at equilibrium. It provides insight on whether the formation of the reactants or products are favored at equilibrium.

The value of the equilibrium constant is determined from the following expression:

[tex]K \ = \frac{[products]}{[reactants]}[/tex]

It is simply the ratio of the concentration of the products and the concentration of reactants at equilibrium.

If the value of the equilibrium constant, K, is greater than 1, then, at equilibrium, the formation of products is favored. If K is less than 1, then the formation of reactants will be favored.

For systems, however, that are not yet at equilibrium, the direction of the reaction that will lead to equilibrium can be determined using another constant called the reaction quotient, Q. It is obtained using the similar expression as K but instead of using the equilibrium concentrations of the reactants and products, their initial concentrations are used.

The value of Q indicates whether the formation of products or reactants are favored so that equilibrium is achieved. If Q is greater than K, then the formation of reactants (or the reverse reaction) is favored. If Q is less than K, then the formation of products (forward reaction) is favored.

In this problem, the reversible equation provided is:

Br₂(g) + Cl₂(g) ⇄ 2 BrCl(g)            K= 0.150

To obtain the Q value, the initial concentration (in this case the partial pressure)  of the substances are plugged into the equilibrium expression. Since there are no  Br₂(g) and Cl₂(g) initially, only the partial pressure of BrCl will be used in the equation:

[tex]Q = \frac{[BrCl]^2}{[Br_{2}][Cl_{2}]} \ or \ Q = \frac{P_{BrCl}^2}{P_{Br_{2}}P_{Cl_{2}}}\\\\Q = P_{BrCl}^2\\Q = (0.500 \ atm)^2\\\boxed {Q = 0.250}[/tex]

Comparing the Q vs. K,

Q = 0.250 and K = 0.150, hence,

[tex]0.25 > 0.150\\\\\boxed {\boxed {Q > K, the \ reverse \ reaction \ will \ be \ favored; \ the \ reaction \ moves \ to \ the \ left}}[/tex]

Keywords: Equilibrium Constant, Reaction Quotient

In the given chemical equation, NO2- is the reducing agent and Cr2O72- is the oxidizing agent.

In this chemical equation, we can determine the reducing agent and oxidizing agent by examining the changes in oxidation numbers. The reducing agent is the reactant that causes another substance to be reduced, and the oxidizing agent is the reactant that causes another substance to be oxidized.

In this equation, NO2- is the reducing agent because it causes the chromium (Cr) in Cr2O72- to be reduced from a +6 oxidation state to a +3 oxidation state.

On the other hand, Cr2O72- is the oxidizing agent because it causes the nitrogen (N) in NO2- to be oxidized from a +4 oxidation state to a +5 oxidation state.

https://brainly.com/question/33439595

#SPJ11

NO₂⁻ is the reducing agent, H⁺ is neither, and Cr₂O₇²⁻ is the oxidizing agent in the given redox reaction.

Here's the classification of each reactant:

NO₂⁻ (Nitrite ion): Reducing Agent - This reactant loses electrons (is oxidized) and reduces another substance. Specifically, it changes from NO₂⁻ to NO₃⁻.

H⁺ (Hydrogen ion): Neither - This reactant merely provides the acidic environment necessary for the reaction but does not undergo a redox change itself.

Cr₂O₇²⁻ (Dichromate ion): Oxidizing Agent - This reactant gains electrons (is reduced) and oxidizes another substance. Specifically, it changes from Cr₂O₇²⁻ to Cr³⁺.

Thus, in the reaction, NO₂⁻ serves as the reducing agent, H⁺ does not alter its oxidation state and is neither, and Cr₂O₇²⁻ serves as the oxidizing agent.

Complete question:-

Here is a more complex redox reaction involving the dichromate ion in acidic solution: 3no2− + 8h+ + cr2o72− → 3no3− +2cr3+ + 4h2o classify each reactant as the reducing agent, oxidizing agent, or neither.

The answer is D transformed

Answer:

ay nose

Explanation:

Answer: The correct answer is Option C.

Explanation:

Law of conservation of mass states that mass can neither be created nor be destroyed but it can only be transformed from one form to another form.

This also means that total mass on the reactant side must be equal to the total mass on the product side.

The chemical equation for the decomposition of limestone follows:

[tex]CaCO_3\rightarrow CaO+CO_2[/tex]

Let the mass of calcium oxide be 'x' grams

We are given:

Mass of carbon dioxide = 88 grams

Mass of calcium carbonate = 200 grams

Total mass on reactant side = 200 g

Total mass on product side = 88 + x

So, by applying law of conservation of mass, we get:

[tex]200=88+x\\\\x=112g[/tex]

The mass of calcium oxide that would be produced is 112 grams.

Hence, the correct answer is Option C.

For the purpose we will use the following equation for potential energy:

U = m * g * h

In the above equation, m represents the mass of the object, h represents the height of the object and g represents the gravitational field strength (9.8 N/kg on Earth).

When we plug values into the equation, we get following:

U= 50kg * 9.8 N/kg *9m = 4410 J

Final answer:

Mitosis is the process by which skin cells divide to repair damages such as scratches, producing two genetically identical daughter cells, ensuring the integrity and functionality of the skin.

Explanation:

Mitosis is a fundamental process that occurs in somatic cells, such as skin cells, to facilitate growth and repair through the production of identical daughter cells. For example, when you incur a scratch, your body initiates mitosis to produce new skin cells to heal the wound. During mitosis, a skin cell will duplicate its DNA and divide into two new cells, each with the same number of chromosomes as the original cell, ensuring that the repaired skin is genetically identical to the surrounding area. This process is crucial for maintaining the integrity and functionality of our skin, as well as other bodily tissues.

Mitosis is the process of somatic cell division that results in two identical daughter cells. In the case of a skin cell, mitosis is responsible for regenerating new skin cells when you get a cut or scratch.

The automatic switch in an electric kettle saves energy by cutting off power when the water inside boils. By reducing the time over which power is consumed, the automatic switch prevents the kettle from wasting energy.

The automatic switch in an electric kettle saves energy by shutting off power to the kettle once the water inside reaches its boiling point. This prevents the kettle from consuming unnecessary power and thereby wastefully heating water that's already boiling. Without the automatic switch, the kettle would continue to draw electricity, converting it to heat, even after the water is boiling. This automation reduces the time over which power is consumed, leading to fewer units of energy used.

An example of this can be likened to a light bulb that is turned off when not in use. Even if it consumes high power, the light bulb does not waste energy because it is only in operation for the necessary period, wherein the automatic switch in the kettle plays the role of a person switching off the light bulb.

So, it is through this method of selectively controlling the 'on' state of the electrical device, the electric kettle in this case, significant energy savings can be realized over time.

https://brainly.com/question/35373077

#SPJ12

The power of rivers at their source to shape the land comes from the narrowness of their channels, which results in faster currents and strong hydraulic action.

The characteristic of rivers at their source that gives them so much power to shape the land is primarily due to the narrowness of the channel, resulting in a faster current compared to other parts of the river or stream. This faster current is capable of exerting a strong force, or hydraulic action, on the land, which can lead to significant erosion and geomorphological changes. Hydraulic action occurs when the moving water strikes against the bed and banks of the river channel, compressing water and air into cracks and crevices, exerting enormous pressures, and causing material to break away.

Rivers and streams, from their source to their mouth, continually erode the geosphere, transport sediments, and eventually deposit them, significantly altering the landscapes through which they flow. At the source, rivers are typically colder, clearer, and carry less nutrients, featuring swift currents that can inhibit silt accumulation and support unique ecosystems adapted to these conditions.