Which solution listed below yields the highest molar concentration?
a. No right answer.

b. 121.45 g of KOH in 75.0 mL

c. 23.49 g of NH4OH in 125.0 mL

d. 217.5 g of LiNO3 in 2.00 L

e. 15.25 g of Pb(C2H3O2)2 in 65.0 mL

Answer:

The answer to your question is: hydrogen bonding

Explanation:

Hydrogen bonding is a kind of interaction dipole-dipole, that means that 2 molecules attract each other because the have partial charges.

In the picture we can see 4 molecules of water, red circles are oxygens and white circles are hydrogens. In this bonding, Oxygen due to its size, and atomic number is more electronegative than hydrogen, then in water molecule is formed a partial negative charge in oxygen and a partial positive charge in hydrogen.

Finally, because of this partial charge, one oxygen can bond to one hydrogen of another molecule.

Due to its polarity, a water molecule can form weak hydrogen bonds with other water molecules or other polar molecules. Polar molecules interact well with water, but non-polar molecules do not.

Water molecules have a polarity due to the presence of polar covalent bonds within them. This polarity refers to the presence of both a positive and negative charge within the molecule, specifically, the charges are not evenly distributed. Therefore, an oxygen atom and two hydrogen atoms form a water molecule, where the oxygen atom carries a slight negative charge and the two hydrogen atoms carry a slight positive charge, causing the molecule to have a distinct 3-dimensional structure.

These charge imbalances within a water molecule and between separate water molecules allow them to attract each other, forming a weak bond known as a hydrogen bond. Hydration bonds are formed when a weakly positive hydrogen atom already bonded with one electronegative atom in a molecule gets attracted to another electronegative atom in a different molecule. This bond is of high significance in human physiology.

Water can also attract or get attracted to other polar molecules and ions due to its polarity. However, non-polar molecules like oils and fats do not interact well with water. This is why these substances do not dissolve readily in water and are termed as hydrophobic.

https://brainly.com/question/15007701

#SPJ6

Answer:

The answer is B, HNO3 solution of 0.000015 M yields a pH of 4.8.

Explanation:

The equation to find the pH of a solution is the following:

[tex]ph = - log( {h}^{ + } ) [/tex]

Since HNO3 is a strong acid, it almost 100% dissociates according to a 1:1 molar ratio, into hydrogen cations and nitrate anions, meaning the concentration of hydrogen ions is nearly the same as the concentration of the acid sollution.

[tex]ph = - log(0.000015) = 4.8239...[/tex]

We can round that up to 4.8, meaning we have our answer, 0.000015 M.

Answer:

The answer is B

The number of sodium atoms (Na) equals the number of carbon atoms (C)

I did the quiz, hope this helps!

Answer:

The answer is Bob

Explanation:

The science exist to kinds of measurements base units and derive units of measurement.

Base units are the ones that measure: length, mass, time, electric current, temperature, luminous intensity and amount of substance.

Derivative units of measurement are obtain when we combine the base units.

Know from your question

Bob measures length is a base unit

Jill measures density is a derivative unit, is the combination of mass and volumen

Kim measures mass is a base unit

Steve measures brightness is a base unit.

Steve, who is measuring the object's brightness, needs to derive a unit of measurement due to the nature of the aspect he is quantifying.

In this scenario, Steve, who is measuring the object's brightness, must derive a unit of measurement. Length (Bob), density (Jill), and mass (Kim) all have established units such as meters, kilograms per cubic meter, and kilograms, respectively. On the other hand, brightness does not have a fundamental unit in the International System of Units (SI). It's typically quantified in terms of lux or lumens, which are derived units that depend on other factors like the area over which the light is spread.

https://brainly.com/question/17619508

#SPJ2

Explanation:

The given precipitation reaction will be as follows.

        [tex]AgNO_{3}(aq) + NaCl(aq) \rightarrow AgCl(s) + NaNO_{3}(aq)[/tex]

Here, AgCl is the precipitate which is formed.

It is known that molarity is the number of moles present in a liter of solution.

Mathematically,       Molarity = [tex]\frac{\text{no. of moles}}{\text{volume in liter}}[/tex]

It is given that volume is 1.14 L and molarity is 0.269 M. Therefore, calculate number of moles as follows.

                    Molarity = [tex]\frac{\text{no. of moles}}{\text{volume in liter}}[/tex]

                     0.269 M = [tex]\frac{\text{no. of moles}}{1.14 L}[/tex]

                    no. of moles = 0.306 mol

As molar mass of AgCl is 143.32 g/mol. Also, relation between number of moles and mass is as follows.

               No. of moles = [tex]\frac{mass}{\text{molar mass}}[/tex]

                   0.307 mol = [tex]\frac{mass}{143.32 g/mol}[/tex]

                           mass = 43.99 g

Thus, we can conclude that mass of precipitate produced is 43.99 g.

Tesla and Edison could have improved their working relationship through active listening, respectful communication, willingness to compromise, seeking mediation, and focusing on their shared ambition in the field of electricity.

Nikola Tesla and Thomas Edison, both monumental figures in the history of electricity, could have employed several strategies to reconcile their differences and foster a more productive working relationship. The following are five potential approaches:

https://brainly.com/question/31558006

#SPJ3

Answer:

Protein B with 58400 [tex]M_{r}[/tex]

Explanation:

[tex]M_{r}[/tex] is an abreviation of relative molecular mass and is a measure of weight in macromolecules such as proteins,.

If you compare and order the macromolecules [tex]M_{r}[/tex] you obtain:

[tex]58400 M_{r} >27000M_{r} >15600M_{r} >11300M_{r}[/tex]

Remember that the largest protein will emerge first of the gel filtration column, and so on, until the smalest protein have been emerged. The above due to the smallest protein moves a longer distance than the largest protein.

In view of the above the largest protein is protein B with 58400 [tex]M_{r}[/tex]

Answer:

The correct answer is "protein B, with ????r=58400Mr=58400".

Explanation:

A gel filtration column separates different molecules in a mixture according to their molar masses. The gel particles that comprise a gel filtration column are made of Sephadex, a porous material that retains low-molar-mass molecules. Therefore, the proteins that have the higher molecular masses will be the first to elute since they do not interact with the column. In this case, protein B with a molar mass of 58400 will be the first to elute

Answer:

The answer to your question is: letter B is correct

Explanation:

Calculate the Molarity of each solution an compare it to the solubility

Solubility

MW Cd(CN)2    = 252 g

                                         252 g      ----------------  1 mol

                                           1.7 g   ------------------    x

                                        x = (1.7 x1 ) / 252

                                        x = 0.006 mol

            Molarity = 0.006 / 0.1 = 0.067

a.97.0 g of Cd(CN)2 in 5.00 mL

                                          252 g      ----------------  1 mol

                                             97 g --------------------   x

                                          x = (97 x 1) / 252

                                          x = 0.38

            Molarity = 0.38 / 0.005 =75              Saturated

b. 325.5 g of Cd(CN)2 in 20.5 L

                                          252 g      ----------------  1 mol

                                        325.5 g     ----------------    x

                                        x = (325.5 x 1) / 252

                                        x = 1.29 mol

            Molarity = 1.29 / 20.5 = 0.063          Unsaturated

c. No right answer.

d. 4.25 g of Cd(CN)2 in 250.0 mL

                                            252 g      ----------------  1 mol

                                             4.25 g     ---------------   x

                                           x = (4.25 x 1) / 252

                                           x = 0.017

               Molarity = 0.017 / 0.25 = 0.067       Saturated

e. 5.750 g of Cd(CN)2 in 330.0 mL                

                                             252 g      ----------------  1 mol

                                              5.75 g ------------------    x

                                           x = (5.75 x 1) / 252 = 0.023

              Molarity = 0.023 / 0.33 = 0.07        Saturated

Among the following options no solution is unsaturated, because every given solutions contains more solute that its saturation point. Hence, option c is correct.

An unsaturated solution is the one which contains less concentration solute in the solution. A solution is said to be saturated if the solvent dissolves maximum amount of solute at a given temperature.

For an unsaturated solution, the mass solute will be less that the saturation point. Here the solubility of solute is 1.70 g /100 ml . Thus its solubility in 250 ml will be about 4.25 g and that in 330 ml is 5.7 . Thus the solutions in d and e will be saturated.

The amount of solute in solution b is greater and that in solution a also greater. They all for,s saturated solutions.

Hence, no unsaturated solution is given.

To know more on saturated solution, refer here:

https://brainly.com/question/1851822

#SPJ2

Answer:

The answer to your question is Endothermic reaction

Explanation:

Endothermic reactions are reactions that absorbe energy from the environment.

All the reactions that needs heat to proceed are endothermic, example: photosynthesis, reactions in the laboratory that are heated, heat our meals.

This is an endothermic reaction because the enthalpy of the products is higher than the enthalpy of the reactants,

A reaction diagram illustrates the changes in enthalpy and the reaction progression, with the 'hill' or 'saddle' shapes indicating the activation energy barriers in one-step or two-step reactions, respectively.

A reaction diagram illustrates the changes in enthalpy and the progression of a chemical reaction over time. The diagram you're describing, with either a 'hill' shape or a 'saddle' shape, represents the energy changes that occur during a chemical reaction. The vertical axis measures the enthalpy of the system, while the horizontal axis represents the reaction coordinate, showing the progress from reactants to products.

In a one-step reaction, the diagram shows one energy barrier to be overcome, which is represented by the 'hill' on the curve. This barrier is known as the activation energy, which is the energy required to initiate the reaction. In a two-step reaction, two such barriers exist, and the 'saddle' shape of the reaction curve reflects this. The highest points on these curves represent the transition states, which are unstable species that exist at the peak of the activation energy.

The type of reaction can often be determined by the relative energies of the reactants and products. If the products have lower energy than the reactants, the reaction is exothermic. Conversely, if the products have higher energy, the reaction is endothermic. The difference in enthalpy between the reactants and products indicates the overall energy change of the reaction.

Answer:

C7H5N3O6

Explanation:

C = 12 g/mol

O = 16 g/mol

H = 1 g/mol

N = 14 g/mol

CO2 = 44 g/mol

H2O = 18 g/mol

NH3 = 17 g/mol

* 44 g CO2 is produced from 12 g C

0.213 g CO2 is produced from = (12)(0.213) / 44 = 0.0581 g C present in 0.157 g compound.

* 18 g H2O is produced from 2 g H

0.0310 g H2O is produced from = (2)(0.0310) / 18 = 0.0034 g H present in 0.157 g compound.

* 17 g NH3 is produced from 14 g N

0.0230 g NH3 is produced from = (14)(0.0230) / 17 = 0.0189 g N present in 0.103 g compound.(this is different)

If in 0.103 g compound there is 0.0189 g N

in 0.157 g compound there is ;

(0.157)(0.0189) / 0.103 = 0.0288 g N

* Mass of C, H and N = 0.0581 + 0.0034 + 0.0288 = 0.0903 g

The rest is mass of O = 0.157 - 0.0903 = 0.0667 g

Moles of elements in the compound sample:

C = 0.0581 g / 12 g/mol = 0.00484 mol

H = 0.0034 g / 1 g/mol = 0.0034 mol

N = 0.0288 g / 14 g/mol = 0.00205 mol

O = 0.0667 g / 16 g/mol = 0.00417 mol

Smallest mole ratio:

N = 0.00205 / 0.00205 = 1.00

C = 0.00484 / 0.00205 = 2.36

H = 0.0034 / 0.00205 = 1.66

O = 0.00417 / 0.00205 = 2.00

Multiplying by 3 we get;

N = 3

C = 7

H = 5

O = 6

Simplest formula:

C7H5O6N3

This is probanly TNT (trinitrotoluen)

Final answer:

The empirical formula of the compound is determined by converting the masses of CO2, H2O, and NH3 to moles of C, H, and N, respectively, and then finding the simplest whole number ratio of these elements.

Explanation:

To determine the empirical formula of the compound, we must first find the number of moles of carbon, hydrogen, and nitrogen in the given samples.

From the combustion data of carbon to CO₂, we use the mass of CO₂ to find the moles of carbon. The molar mass of CO₂ is 44.01 g/mol, so:

0.213 g CO₂ × (1 mol CO₂ / 44.01 g CO₂) = 0.00484 mol CO₂

Each mole of CO₂ contains 1 mole of carbon, so:

0.00484 mol CO₂ × (1 mol C / 1 mol CO₂) = 0.00484 mol C

Similarly, from the mass of H₂O, we find the moles of hydrogen. The molar mass of H₂O is 18.02 g/mol, so:

0.0310 g H₂O × (1 mol H₂O / 18.02 g H₂O) = 0.00172 mol H₂O

Each mole of H₂O contains 2 moles of hydrogen, hence:

0.00172 mol H₂O × (2 mol H / 1 mol H₂O) = 0.00344 mol H

For nitrogen, the molar mass of NH₃ is 17.03 g/mol, which means:

0.0230 g NH₃ × (1 mol NH₃ / 17.03 g NH₃) = 0.00135 mol NH₃

Each mole of NH₃ contains 1 mole of nitrogen, thus:

0.00135 mol NH₃ × (1 mol N / 1 mol NH₃) = 0.00135 mol N

Finally, to find the ratio of atoms in the empirical formula, divide the moles of each element by the smallest number of moles obtained:

The empirical formula is C₄H₃N. The oxygen content is assumed to make up the remainder of the compound's mass. However, since the combustion analysis provides information for C, H, and N only, we'll stop at determining their ratios.

Answer:

[tex]N=47,954,528.3 atoms\\N=4.792x10^{7}atoms[/tex]

Explanation:

First we need to match the units of both measures, let's make meters for both of them, so:

[tex]d=5.3x10^{-10} m\\1in=2.54cm=0.0254m[/tex]

Now we need to make a relation between both measures, as we know that the first distance is:

[tex]5.3x10^{-10}m/atom[/tex]

Then:

[tex]N=\frac{0.0254m}{5.3x10^{-10}m/atom} \\\\N=47,954,528.3 atoms\\N=4.792x10^{7}atoms[/tex]

Answer:

The answer to your question is: water, polar solvent.

Explanation:

Data

sample of CaCl2

Solid copper this option is incorrect because in order to dissolve something the solvent must be liquid and this is a solid solvent.

water, I think this option is right, because CaCl2 is ionic and water is a polar solvent, CaCl2 will dissolve in water.

a polar solvent, CaCl2 will dissolve is a polar solvent like water, this option is correct.

hexane, CaCl2 will not dissolve in hexane because hexane is a non polar solvent and CaCl2 is ionic. This option is wrong

a nonpolar solvent This option is not right, CaCl2 will only dissolve in polar solvents.

liquid mercury, This option is wrong, mercury is not a solvent.

Matthias can dissolve the calcium chloride, an ionic compound, in water, a polar solvent. Solid copper, hexane, and liquid mercury won't effectively dissolve it.

Matthias can dissolve the sample of calcium chloride, an ionic compound, in water. Water is a polar solvent and is known for its ability to dissolve a variety of compounds, especially ionic compounds. The process of dissolution occurs because water molecules can attract and surround the ions in the calcium chloride, leading to its dissolution. On the other hand, solid copper, hexane (a nonpolar solvent), and liquid mercury will not effectively dissolve the calcium chloride.

https://brainly.com/question/36365815

#SPJ2

Final answer:

The three most critical pieces of information on a chemical container label are the chemical name, any hazard warnings, and the concentration, which provide essential identification, safety, and usage details.

Explanation:

When reading a chemical container label, three of the most important pieces of information that should be prioritized are the chemical name, any hazard warnings, and the concentration of the chemical. The chemical name is essential for identification and ensuring you are working with the correct substance. Hazard warnings, often represented by the Hazard Diamond or fire diamond, provide critical safety information about the risks associated with the chemical, including flammability, reactivity, and health risks. The concentration indicates the strength of the chemical and is necessary for proper dilution, usage, and storage.

Knowing these details is important for safety in a laboratory setting and for environmental protection, as some chemicals require specific disposal methods to prevent harm to people and the environment. It's always wise to reference the safety data sheets available for chemicals to ensure thorough understanding of safety precautions and handling instructions.

Answer:

a) 0.4004 mL : 4 significant figures

b) 6000 g : 1 significant figure

c) 1.00030 km : 6 significant figures

d) 400. mm : 3 significant figures

Explanation:

Significant figures or digits of a number refers to the trapped zeros or the non-zero digits that have meaning and contribute to the precision of the number.

a) 0.4004 mL : 4 significant figures, zeros between the non-zero digits are the significant digits and leading zeros are not significant.

b) 6000 g : 1 significant figure, trailing zeros are not considered significant.

c) 1.00030 km : 6 significant figures, trailing zeros in a decimal number are significant.

d) 400. mm : 3 significant figures, decimal after the number indicates three significant figures.

Answer:

The answer to your question is: c) Water reacts with group 1 metals

Explanation:

A chemical property is a property that shows a change in the original molecule.

a) Water is a polar molecule  This is a physical property of water, it doesn't change the original composition of water. This option is incorrect.

b) Water is the universal solvent.  This is also a physical property of water, when water dissolves something it continues being water, then this answer is incorrect.

c) Water reacts with group 1 metals  Most of the reactions are chemical properties in this example when water reacts with a metal there is a change. This is the right option.

d) Water has a high specific heat capacity. This option is not correct, heat capacity is not a chemical property is a physical one.

Answer:

it is C!

Explanation:

i did the quiz on usatestprep

Answer:

You have to apply the colligative property of osmotic pressure and other stuff.

The final answer is 37.2  kg/m

Explanation:

Hope you can understand, my notes. A little sloppy. Enjoy it! :)

The molar mass of the new protein, calculated using osmotic pressure measurements and applying the van't Hoff equation, is approximately 841 g/mol.

The molar mass of the new protein can be determined using osmotic pressure measurements by applying the van't Hoff equation for osmotic pressure (Π) which is given by the formula Π = (n/V)RT, where Π is the osmotic pressure, n is the number of moles of solute, V is the volume of the solution in liters, R is the ideal gas constant, and T is the temperature in Kelvin.

To find the molar mass (M), we need to rearrange the equation: M = (m/n), where m is the mass of the solute. Combining these equations gives us M = (mRT)/(VΠ).

First, convert the temperature to Kelvin by adding 273.15 to the Celsius temperature: T = 25 + 273.15 = 298.15 K. Next, convert the volume of the solution to liters: V = 50.0 mL = 0.0500 L. Finally, convert the mass of the protein to grams: m = 225 mg = 0.225 g.

Using the given osmotic pressure (Π = 4.18 mm Hg) and converting it to atm (1 mm Hg = 1 torr = 1/760 atm), we have Π = 4.18/760 atm. Now we can use the ideal gas constant in L atm/(K mol): R = 0.0821 L atm/(K mol). Substituting all the values into the equation we get:

M = (0.225 g  x0.0821 L atm/(K mol) x 298.15 K) / (0.0500 L x 4.18/760 atm)

= (0.225 x 0.0821 x 298.15) / (0.0500 x 4.18/760)

= (18.42) / (0.0219)

≈ 841 g/mol.

Therefore, the molar mass of the new protein is approximately 841 g/mol.

Answer:

The answer to your question is:

16.47 g of N2 and 3.52 g of H2

Explanation:

Data  

20 g of products were obtain.

Process

AW N2 = 28 g

AW H2 = 2g

MW NH3 = 17 g

                                     N2(g) + 3H2(g) ---> 2NH3(g)

                                     28g       3(2)g            2(17) g

                                                                        20 g

N2

                28 g  N2 -------------------  34 g of NH3

                 x            --------------------  20 g of NH3

x = 20(28)/34 = 16.47 g of N2

H2            6 g of H2 -------------------  34 g of NH3

                  x                                       20 g of NH3

x = 20(6)/34 = 3.52 g of H2

Total mass = 16.47 g of N2 + 3.52 g of H2 = 19.99 g ≈ 20 g

Aldehydes can be oxidized to form organic acids, specifically carboxylic acids, not ketones. Primary alcohols can also be oxidized to aldehydes and then further to carboxylic acids.

When discussing the oxidation of aldehydes, it's important to understand that they can be further oxidized to form organic acids, specifically carboxylic acids. This is in contrast to primary alcohols, which can be initially oxidized to aldehydes and then further to carboxylic acids if the oxidation conditions are strong enough. Therefore, aldehydes do not oxidize to form ketones, but rather to organic acids.

It's noteworthy that primary alcohols like RCH₂OH can be selectively oxidized to aldehydes using milder oxidizing agents such as PCC or DMP. In comparison, secondary alcohols are oxidized to form ketones, and tertiary alcohols do not oxidize readily. However, the oxidation of aldehydes takes them one step further, from the aldehyde stage to the carboxylic acid stage.

Answer : The molar mass of unknown compound is 152.38 g/mole

Explanation :

Depression in freezing point = [tex]1.9^oC[/tex]

Mass of unknown compound = 16.5 g

Mass of water = 106.0 g

Formula used :  

[tex]\Delta T_f=i\times K_f\times m\\\\\Delta T_f=i\times K_f\times\frac{\text{Mass of unknown compound}}{\text{Molar mass of unknown compound}\times \text{Mass of water in Kg}}[/tex]

where,

[tex]\Delta T_f[/tex] = depression in freezing point

i = Van't Hoff factor = 1 (for non-electrolyte)

[tex]K_f[/tex] = freezing point constant for water = [tex]1.86^oC/m[/tex]

m = molality

Now put all the given values in this formula, we get

[tex]1.9^oC=1\times (1.86^oC/m)\times \frac{16.5g\times 1000}{\text{Molar mass of unknown compound}\times 106.0g}[/tex]

[tex]\text{Molar mass of unknown compound}=152.38g/mole[/tex]

Therefore, the molar mass of unknown compound is 152.38 g/mole

Answer: The molar mass of the unknown compound is 152 g/mol.

Explanation:

Depression in freezing point is given by:

[tex]\Delta T_f=i\times K_f\times m[/tex]

[tex]\Delta T_f=T_f-^0T_f=(0-(-1.9)^0C=1.9^0C[/tex] = Depression in freezing point

i= vant hoff factor = 1 (for non electrolyte)

[tex]K_f[/tex] = freezing point constant = [tex]1.86^0C/m[/tex]

m= molality

[tex]\Delta T_f=i\times K_f\times \frac{\text{mass of solute}}{\text{molar mass of solute}\times \text{weight of solvent in kg}}[/tex]

Weight of solvent (water)= 106.0 g = 0.106 kg

Molar mass of unknown non electrolyte = M g/mol

Mass of unknown non electrolyte added = 16.5 g

[tex]1.9=1\times 1.86\times \frac{16.5g}{M g/mol\times 0.106kg}[/tex]

[tex]M=152g/mol[/tex]

Thus the molar mass of the unknown compound is 152 g/mol.

Answer:

0.09 moles of Br₂

Explanation:

Bromine liquid it refers at Br₂ molecule which is liquid at room temperature.

Now to calculate the number of moles we use the following formula:

number of moles = mass (g) / molecular mass (g/mol)

For Br₂ molecule we have:

number of moles = 14.4 / 160 = 0.09 moles of Br₂

Answer:

The number of moles of bromine liquid produced is 0.09.

Explanation:

Moles = [tex]\frac{\text{Mass of compound}}{\text{Molar mass of compound}}[/tex]

Mass of bromine liquid = 14.4 g

Molecular mass of bromine liquid [tex]Br_2[/tex]= 160 g/mol

Moles of bromine liquid = [tex]\frac{14.4 g}{160 g/mol}=0.09 mol[/tex]

The number of moles of bromine liquid produced is 0.09.

Answer:

The answer to your question is: 0.1 M

Explanation:

data

Volume of AgNO3 = 20.00 ml

                   1000 ml --------------  1 l

                       20 ml --------------- x              

          x = 20x 1 /1000 = 0.02

AgCl = 0.2867 g

MW of AgCl = 35.45 + 107.9 = 143.35 g

                       143.35 g -------------- 1 mol

                       0.2867 g -------------  x

  x = 0.2867 x 1 / 143.35 = 0.002 moles of AgCl

   From the balance reaction we see that the proportion of AgNO3 to AgCl is 1:1, then

           1 mol of AgNO3 -------------------- 1 mol of AgCL

                 x                   ---------------------  0.002 moles of AgCl

 x = 0.002 moles of AgNO3

   This moles of AgNO3 are in 20 ml or 0.02 liters

So, Molarity = # moles/liter

      Molarity = 0.002 moles/ 0.02 = 0.1 M

Scientists had used creativity in their investigations is the statement best explains why the atomic theory developed efficiently.

Answer: Option B is the correct choice for the given question.

Explanation:

The basic purpose of experimentation and research is to get conclusions as a solid base for development of theories in science which can help humanity in many other factors.

By utilizing these theories many other experiments and development can be done.  Similarly while postulating the atomic theory scientist had to experiment and research many times and had to do things creatively to get to this important theory.

Answer: b

Explanation:

edg 2020

Answer:

b. H3O c. H2SO4 d. HNO3

Explanation:

The hydrogen bonds can be form with molecules that have free electron pairs  and hydrogen atoms. In the case of NH4 molecule, the "free" electron pair in the nitrogen is not free because there is an hydrogen occuping them, and, in fact, this molecule has a positive charge. The other acids have free electron pairs in the oxigen, nitrogen or sulfur.

The molecules that have the ability to form hydrogen bonds with themselves

are H₃0, H₂SO₄, and HNO₃

The above element removes the high number of the electron density in the covalent bond with hydrogen, leaving the H atom lack or lower number of electron

An hydrogen bond is also defined as the electromagnetic attraction that is formed between a partially positively charged hydrogen atom fused to a highly electronegative atom and another close electronegative atom.

Conclusively, we can therefore say that option b, c, and d explain what the statement means.

Learn more from

https://brainly.com/question/17575778

Answer:

47 g/mol

Explanation:

0.70 (50 amu) + 0.25 (35 amu) + 0.05 (70 amu) = 47 amu = 47 g/mol

Explanation:

The atomic weight of element X is calculated by taking the weighted average of the atomic masses of its isotopes. Considering the individual contribution of each isotope, which is determined by multiplying each isotope's atomic mass by its relative abundance, the atomic weight of element X is 47.25 amu.

The atomic weight of an element is calculated by taking the weighted average of the atomic masses of its naturally occurring isotopes. An isotope's contribution to the overall atomic weight is proportional to its abundance. In this case, Element X is composed of three isotopes A, B, and C.

Following are the contributions from each isotope:

So, by adding all these contributions, the atomic weight of element X would be 35 + 8.75 + 3.5 = 47.25 amu.

https://brainly.com/question/36410206

#SPJ2

Answer:

45.3 °C was the initial temperature

Explanation:

Step 1: explain the problem

We have to find the initial temperature, when a certain amount of heat raises this sample of water to its boiling point ( 100 °C)  

⇒this amount of heat = 5.61 x 10^5 J

We will use the formule : Q = mcΔT

with Q = heat transfer ( J)

with m = mass of the substance (g)

with c = specific heat ( J/g °C)

with ΔT = change in temperature ( in °C or K)

The  specific heat of water is 4.186 J/g °C

Step 2 : Calculate the initial temperature

To find the initial temperature, we have to rearrange the formule:

ΔT = Q / mc

In this case we have :

ΔT = 5.61 * 10^5 J / 2450 g * 4.186 J/g °C = 54.70

⇒ The final temperature of the water is the boiling point (100 °C). The change of temperature is 54.70  This means that the boiling point is 54.70°C higher than the initial temperature.

This means : ΔT = Tboiling point - Tinitial

ΔT = 54.70 °C = 100 °C - Tinitial

Tinitial = 100 °C - 54.70 °C = 45.3 °C

The initial temperature of the water is 45.3 °C

As number of gaseous moles in reactant and prodict are same that is 4

So No change will occur

Answer:

B. No change will occur.

Explanation:

Notice that the two moles of gas on the side of the reactants also reflects on the side of the products (i.e. there are also two moles of gas on the side of the products).

This translates to there won't be any change in the equilibrium if the pressure is increased.

The only important factor to take note of is that altering the pressure can only result in a significant change for equilibrium reactions between gases, when the reaction features a change in the number of moles of gas.

Answer:

The average is 63.6

Explanation:

Step 1: Calculate the total points of all tests together

The total of the 4 tests is : 83.2 points + 44.6 points + 74.4 points + 52.3 points = 254.5 points

Step 2: Calculate the average points

We have 4 tests so we divide the total number by 4

254.5 points  / 4 = 63,625 points

Step 3: take significant digits into account

Sum or difference : Add or subtract in the normal way, then round the answer to the LEAST number of places to the decimal point of any number in the problem

⇒ in this case : 83.2 + 44.6 + 74.4 + 52.3 = 254.5

Multiplication and division: the answer is reported in such a way that it reflects the reliability of the least precise operation. Your answer cannot be MORE precise than the least precise measurement.

254.5 / 4 = 63.6

Answer:

A D E B C F

Explanation:

Answer:

I'm still learning but I wish I knew the answer to it.

An example of a solution is D. A mixture of rock granules .

- A solution is a homogeneous mixture composed of a solute dissolved in a solvent.
- In this example, sugar acts as the solute and tea acts as the solvent.
- When sugar is added to tea and stirred, it dissolves and becomes evenly distributed throughout the tea.
- The resulting mixture is a solution, where the sugar particles are dispersed at the molecular level in the tea.
- This is different from a mixture like sand, where the components (rock granules and bits of shell) are physically mixed but not dissolved in each other.

In summary, sugar dissolved in tea is an example of a solution because it involves a solute (sugar) being dissolved in a solvent (tea) to form a homogeneous mixture.

Hence Option D is correct.

For more similar questions on solution

https://brainly.com/question/32258349

#SPJ1

Final answer:

Sugar dissolved in tea is the example of a solution because it is a homogeneous mixture with a uniform composition, whereas the other options are either pure elements or heterogeneous mixtures.

Explanation:

The example of a solution in the choices provided is C. Sugar dissolved in tea. A solution is defined as a homogeneous mixture where the composition is uniform throughout. In sugar dissolved in tea, the sugar particles are completely dispersed in the water, and everywhere in the solution the composition is consistent, making it a homogeneous mixture (solution).

Other options provided such as B. Mercury is a pure element, not a solution. D. A mixture of rock granules and bits of shell known as sand is a heterogeneous mixture because its components can be physically distinguished, and its composition is not uniform throughout.