A scientist measures the standard enthalpy change for the following reaction to be -213.5 kJ: CO(g) 3 H2(g)CH4(g) H2O(g) Based on this value and the standard enthalpies of formation for the other substances, the standard enthalpy of formation of H2O(g) is kJ/mol. Submit AnswerRetry Entire Group

Answer: B.) I, II, and III

Explanation:

Exothermic reactions are defined as the reactions in which energy of the product is lesser than the energy of the reactants. The total energy is released in the form of heat and [tex]\Delta H[/tex] for the reaction comes out to be negative.

Endothermic reactions are defined as the reactions in which energy of the product is greater than the energy of the reactants. The total energy is absorbed in the form of heat and [tex]\Delta H[/tex] for the reaction comes out to be positive.

I) The temperature (of water) increases when calcium chloride dissolves in water : Thus the reaction is exothermic and  [tex]\Delta H[/tex] for the reaction comes out to be negative.

II)  Steam condenses to liquid water : The energy is released when bonds are formed when it coverts from gas to liquid and thus [tex]\Delta H[/tex] for the reaction comes out to be negative.

III) Water freezes : The energy is released when bonds are formed to get converted from liquid to solid and thus [tex]\Delta H[/tex] for the reaction comes out to be negative.

IV) Dry ice sublimes : The energy is absorbed when bonds are broken to get converted from solid to gas and thus [tex]\Delta H[/tex] for the reaction comes out to be positive.

Answer:

2nd order reaction

Explanation:

Let us assume the reaction to be:

                         R → P

Where R is the reactant and P is the product.

So here, say initially we have "a" amount of reactant.

                        R → P

At t=0:             a      0       (initial condition)

At t=t:            a-x      x

Say x be the amount of reactant which forms the product in time t.

So from the rate law, we have

                 rate of decomposition = k (R)ⁿ

Where k is rate constant , R is amount of reactant at time t and n is the order of the reaction

From the question, at the instant when 5% and 20% have reacted, we will be left with 95% and 80% of the reactant respectively. So writing the rate law equation:

1.07 = k ( 95a / 100)ⁿ

0.76 = k ( 80a/100)ⁿ

Dividing these two equations, we get:

(1.07 / 0.76 ) = ( 95/80 )ⁿ

Taking logarithm on both sides we get

n = ( ㏒ (1.07 / 0.76) ) ÷ ㏒(95/80) = 2.0067 ≈ 2

Therefore the reaction is of order 2

Answer:

+1, lose, 1, 4s, 4s and 3d

Explanation:

An element with the valence electron configuration 4s¹ would form a monatomic ion with a charge of +1. In order to form this ion, the element will lose 1 electron from the 4s subshell.

The corresponding oxidation reaction is:

K ⇒ K¹⁺ + 1 e⁻

[Ar] 4s¹ ⇒ [Ar]

If an element with the valence configuration 4s² 3d⁶ loses 3 electrons, these electrons would be removed from the 4s and 3d subshell(s).

The corresponding oxidation reaction is:

Fe ⇒ Fe³⁺ + 3 e⁻

[Ar] 4s² 3d⁶ ⇒ [Ar] 4s⁰ 3d⁵

An element with 4s1 valence configuration will form a +1 ion by losing 1 electron from 4s subshell. An element with 4s2 3d6 configuration will lose electrons firstly from 4s subshell and then from 3d, if it loses 3 electrons.

An element with the valence electron configuration 4s1 would form a monatomic ion with a charge of +1. In order to form this ion, the element will lose 1 electron from the 4s subshell.
Meanwhile, an element with the valence configuration 4s2 3d6 that loses 3 electrons will remove these electrons first from the 4s subshell (2 electrons), and then one from the 3d subshell. This is due to the fact that 4s electrons are generally removed before 3d electrons in transitional metals.

https://brainly.com/question/29157546

#SPJ3

Answer:

a) Oxaloacetate.

b) Malate.

Explanation:

The malate-aspartate shuttle works in the mitochondria of the liver, kidney, and heart.

The cytosolic NADH reducing equivalents transfer to the cytosolic oxalacetate, producing malate, by the cytosolic malate dehydrogenase. This malate crosses the inner mitochondrial membrane throughout the malate-α-ketoglutarate transport system.

Inside the matrix, the reducing equivalents pass from the malate to the NAD⁺, forming NADH, by the action of the mitochondrial malate dehydrogenase. This formed NADH passes electrons directly to the respiratory chain.

Answer:

ΔH  = - 272 kJ

Explanation:

We are going to use the fact that Hess law allows us to calculate the enthalpy change of a reaction no matter if the reaction takes place in one step or in several steps. To do this problem we wll add two times the first step to second step as follows:

N2(g) +         3H2(g) →          2NH3(g)                 ΔH=−92.kJ  Multiplying by 2:      

2N2(g) +       6H2(g) →          4NH3(g)                        ΔH=− 184 kK

plus

4NH3(g) +     5O2(g) →          4NO(g) +6H2O(g)        ΔH=−905.kJ

__________________________________________________

2N2(g) +   6H2(g) + 5O2(g)→  4NO(g)  + 6H2O(g)      ΔH = (-184 +(-905 )) kJ

                                                                                     ΔH =    -1089 kJ

Notice how the intermediate NH3 cancels out.

As we can see this equation is for the formation of 4 mol NO, and we are asked to calculate the ΔH  for the formation  of one mol NO:

-1089 kJ/4 mol NO  x 1 mol NO =  -272 kJ (rounded to nearest kJ)

The net enthalpy change for the formation of one mole of nitric oxide from nitrogen, hydrogen, and oxygen is -318.25 kJ, which is obtained by summing up the enthalpy changes of the two relevant reactions and adjusting for the number of moles of NO produced.

To calculate the net change in enthalpy for the formation of one mole of nitric oxide from nitrogen, hydrogen and oxygen, we necessitate to add the enthalpy changes of the two reactions. For the initial reaction, nitrogen and hydrogen react to produce ammonia, with ΔH = -92 kJ. In the second stage, ammonia reacts with oxygen to form nitric oxide and water, with ΔH = -905 kJ.

Since the second equation leads to formation of 4 moles of nitric oxide, we divide the enthalpy change for this reaction by 4 to get the enthalpy change for one mole of nitric oxide, which is -905/4 = -226.25 kJ.

The total enthalpy change for the formation of a mole of nitric oxide hence will be the sum of ΔH for the both reactions, i.e., -92 kJ + -226.25 kJ = -318.25 kJ.

https://brainly.com/question/14331745

#SPJ12

Answer: [tex]CO_2(s)\rightarrow CO_2(g)[/tex]

Explanation:

Entropy is the measure of randomness or disorder of a system. If a system moves from an ordered arrangement to a disordered arrangement, the entropy is said to decrease and vice versa.

[tex]\Delta S[/tex] is positive when randomness increases and [tex]\Delta S[/tex] is negative when randomness decreases.

a) [tex]H_2(g)+Cl_2(g)\rightarrow 2HCl(g)[/tex]

2 molesof gas are converting to 2 moles of another gas , thus [tex]\Delta S[/tex] is zero.

b) [tex]H_2O(s)\rightarrow H_2O(l)[/tex]

1 mole of solid is converting to 1 mole of liquid, the randomness increases and thus [tex]\Delta S[/tex] is positive.

b) [tex]Pb^{2+}(aq)+2Cl^-(aq)\rightarrow PbCl_2(s)[/tex]

2 moles of ions are converting to 1 mole of solid, the randomness decreases and thus [tex]\Delta S[/tex] is negative

d) [tex]CO_2(s)\rightarrow CO_2(g)[/tex]

1 mole of solid is converting to 1 mole of gas, the randomness increases drastically and thus [tex]\Delta S[/tex] is highly positive.

Answer:

The value of the cell potential under the given conditions is 0.433 V

Explanation:

The cellular potential is generally in standard conditions, that is, 1 M with respect to solute concentrations in solution and 1 atm for gases.

The Nernst equation is useful for finding the potential for reduction in electrodes under conditions other than standards. This is what happens in this case, since the concentrations are different than 1M and the gas pressure varies from the value 1 atm.

The Nernst equation is:

[tex]E=E^{o} -\frac{R*T}{n*F} *ln(Q)[/tex]

Where E refers to the electrode potential.

Eº = potential in standard conditions.

R = gas constant.

T = absolute temperature (in Kelvin degrees).

n = number of moles of electrons that have participation in the reaction.

F = Faraday constant (with a value of 96500 C / mol, approx.)

Q = reaction ratio

When the reaction occurs at 25 ° C, the numerical value of the constants is replaced by 0.059, the expression being as follows:

[tex]E=E^{o} -\frac{0.059}{n} *lnQ[/tex]

For the reaction aA + bB → cC + dD, Q adopts the expression:

[tex]Q=\frac{C^{c} *D^{d} }{A^{a} *B^{b} }[/tex]

being for solutions the molar concentrations at any moment and for gases the pressure in atmospheres at any moment

In this case:

[tex]Q=\frac{[Co^{+2}] ^{2}*P_{Cl2}  }{[Co^{+3}] ^{2}*[Cl^{-}] ^{2}  }[/tex]

[tex]Q=\frac{[0.175M] ^{2}*8.5  }{[0.695M] ^{2}*[0.315M] ^{2}  }[/tex]

Q=5.43

On the other hand, by observing the following semi-reactions it is possible to see that the number of moles of electrons n involved is 2:

2 Cl- ⇒ Cl₂ + 2 e-

2* [Co³⁺ + e- ⇒ Co²⁺ ]

So, the data to be able to calculate the electrode potential in the requested conditions is:

Replacing you get:

[tex]E=0.483 -\frac{0.059}{2} *ln(5.43)[/tex]

E=0.433 V

So, the value of the cell potential under the given conditions is 0.433 V

Final answer:

To find the cell potential under the given conditions, the Nernst equation is used, combining the standard cell potential (0.483 V), temperature (25 °C), and given concentrations and pressure. Calculation of the reaction quotient (Q) followed by substitution into the Nernst equation yields the cell potential.

Explanation:

The student has asked about calculating the cell potential at 25 °C using the Nernst equation for the reaction 2Co3+(aq) + 2Cl−(aq) → 2Co2+(aq) + Cl2(g) with given concentrations and partial pressure. The standard cell potential (E°) is given as 0.483 V.

First, we will use the Nernst equation:

E = E° - (RT/nF)lnQ

Where:

E is the electrochemical cell potential under non-standard conditions,

E° is the standard electrode potential,

R is the universal gas constant (8.314 J/mol·K),

T is temperature in Kelvin (298 K for 25 °C),

n is the number of moles of electrons exchanged (2 for this reaction),

F is the Faraday constant (96485 C/mol), and

Q is the reaction quotient.

The reaction quotient (Q) is calculated using the given concentrations and pressure:

Q = ([Co2+]^2 * PCl2)/([Co3+]^2 * [Cl−]^2)

Substitute the values:

Q = (0.175^2 * 8.50)/(0.695^2 * 0.315^2)

Perform the calculation to find Q, then substitute this value along with the constants back into the Nernst equation to find the actual cell potential (E) at the specified conditions.

The resulting E value will be the cell potential of the electrochemical cell operating under the given conditions, and it will indicate if the reaction will occur spontaneously if E > 0.

Answer:

This reaction will be nonspontaneous only at low temperatures.

Explanation:

An equation that helps us determine the spontaneity of a reaction is:

ΔG = ΔH - TΔS

A reaction will be spontaneous when ΔG is negative.

A reaction will be nonspontaneous when ΔG is positive.

With a positive ΔS and ΔH, ΔG will only be positive when the multiplication TxΔS is lower than ΔH. That happens when T is a low value. That's why the answer is This reaction will be nonspontaneous only at low temperatures.

Answer:

a) The volume increases

b) The volume decreases

c) The volume does not change

Explanation:

A gas at a pressure of 2.0 atm is in a closed container. Indicate the changes (if any) in its volume when the pressure undergoes the following changes at constant temperature and constant amount of gas.

When there is a change in the pressure (P) at constant temperature (T) and amount of gas (n), we can find the change in the volume (V) using Boyle's law.

P₁.V₁ = P₂.V₂

where,

1 refer to the initial state

2 refer to the final state

a) The pressure drops to 0.40 atm.

P₁.V₁ = P₂.V₂

(2.0 atm) . V₁ = (0.40 atm) . V₂

V₂ = 5 . V₁

The volume increases.

b) The pressure increases to 6.0 atm.

P₁.V₁ = P₂.V₂

(2.0 atm) . V₁ = (6.0 atm) . V₂

V₂ = 0.33 . V₁

The volume decreases.

c) The pressure remains at 2.0 atm.

P₁.V₁ = P₂.V₂

(2.0 atm) . V₁ = (2.0 atm) . V₂

V₂ = V₁

The volume does not change.

Changes in the volume of a gas at constant temperature and constant amount depend on the changes in pressure, and follow Boyle's law. If pressure increases, volume decreases, and if pressure decreases, volume increases. No change in pressure yields no change in volume.

In your question, you're asking about the change in volume of a gas when the pressure changes, at constant temperature and constant amount of gas. This is a matter of Boyle's law, which describes the inverse relationship between pressure and volume in a gas when temperature is held constant.

According to Boyle's law, if the pressure of a gas undergoes an increase (from 2.0 atm to 6.0 atm), the volume will decrease because they are inversely related. Conversely, if the pressure decreases (from 2.0 atm to 0.40 atm), the volume of the gas will increase. If the pressure remains the same (at 2.0 atm), the volume will not experience any change given the conditions remain constant.

https://brainly.com/question/21184611

#SPJ3

“Vapor pressure increases with temperature” is the true statement from the given statements.

Option: A

Explanation:

Vapor pressure exerted in “thermodynamic equilibrium” with solid or liquid phase called “condensed phase” at a given temperature in packed or closed system. “Liquid particles” are arranged with more inter molecular space than solid and not as fixed as solid. Therefore when temperature is increased “kinetic energy” of the molecules also increases and thereby molecules transitioning into vapor also increases and in this way whole process is responsible for increase in “vapor pressure”.

Final answer:

The statement that vapor pressure increases with temperature is true because higher temperatures lead to increased kinetic energies, causing more molecules to escape into the vapor phase.

Explanation:

The correct statement among those listed is that vapor pressure increases with temperature. As the temperature rises, the kinetic energy of the molecules increases, leading to a greater number of molecules having enough energy to escape the liquid phase and enter the vapor phase, thereby increasing the vapor pressure. On the other hand, hydrogen bonds are not chemical bonds; they are strong intermolecular forces that occur between molecules, not within them as chemical bonds do.

Dispersion forces are generally weaker than dipole-dipole forces, and they increase with the mass and size of the molecules involved due to increased polarizability. Finally, intermolecular forces are responsible for the attractions between molecules, not for holding the atoms within a molecule together; that role is filled by intramolecular forces or chemical bonds.

Answer:

(a)  Condensation:Exothermic

(b)  Sublimation: Endothermic

(c)  Vaporization: Endothermic

(d) Freezing: Exothermic

Explanation:

When a phase change occurs, for example going from a liquid to a gas we need to increase the kinetic energy of the molecules to escape to the gas phase where the kinetic energy of the molecules is greater. By the contrary if we remove energy we slow down the molecules increasing their atttraction and slowing them as it occurs when the  goes into the liquid state, hence this phase change is exothermic.

(a)  Condensation : when the phase change is from a gas by definition we have a condensation phase chanhe. The reaction is exothermic, we need to cool the gas to condense.

(b)  Sublimation: crystals of iodine disappear from an evaporating dish as they stand in a fume hood : this phase change receives the name of sublimation and it occurs when a solid goes directly to the gas phase without going through the liquid phase. We need to increase the energy of the molecules so it can go to the gas phase and the change is endothermic.

(c)  Vaporization : rubbing alcohol in an open container slowly disappears: this phase change is vaporization and by difinition is when the liquid goes to the gas phase, hence its name vaporization. The change is endothermic, we need heat  from the sorroundings to give the molecules of the liquid enough energy to escape into the vapor phase.

(d) Molten lava from a volcano turns into solid rock : this phase change is freezing and we need to lower the energy of the liquid by releasing it to the sorroundings, therore it is an exothermic phase change.

The questions referred to four different phase transitions: condensation (exothermic), sublimation (endothermic), evaporation (endothermic), and solidification (exothermic).

(a) When bromine vapor turns to bromine liquid as it is cooled, the process is called condensation. This is an exothermic process where heat is released.

(b) When crystals of iodine disappear from an evaporating dish as they stand in a fume hood, the iodine undergoes sublimation, directly transitioning from a solid to a gas. This is an endothermic process, as heat is absorbed.

(c) The disappearance of rubbing alcohol in an open container is due to evaporation, which is an endothermic process where the liquid alcohol transitions to a gaseous state.

(d) When molten lava from a volcano turns into solid rock, it undergoes solidification or freezing. This is an exothermic process.

https://brainly.com/question/21594831

#SPJ3

Answer:

Correct combinations are

For option A it is 2

For option B it is 4

For option D it is 3

For option C it is 1

Explanation:

For checking the spontaneity of a reaction, we have to check the sign of ΔG using the below formula

where

ΔG is the change in Gibbs free energy

ΔH is the change in enthalpy

T is the temperature

ΔS is the change in entropy

So in case of 1 as ΔH and ΔS are positive if the temperature is above a certain value then ΔG will be less than zero

So in case of 2 as ΔH is negative and ΔS is positive then ΔG will always be less than zero at all temperatures

So in case of 3 as ΔH and ΔS are negative if the temperature is below a certain value then ΔG will be less than zero

So in case of 4 as ΔH is positive and ΔS is negative then ΔG will always be greater than zero but in reverse direction as ΔG is less than zero therefore in reverse direction the reaction will be spontaneous at all temperatures

The reaction in question is exothermic, releasing 369 kJ of energy. This indicates that more energy is involved in product formation than in breaking the reactants. The value of q, signifying heat, is -369 kJ.

The reaction being discussed is: 2Na(s) + 2H2O(l) → 2NaOH(aq) + H2(g), with 369 kJ of energy being released. This type of reaction, where energy is released, is known as an exothermic reaction, indicating that more energy is released in the formation of the products than is absorbed in breaking up the reactants. The value of q, which represents heat in this context, would be -369 kJ, reflecting release of energy.

The reaction takes place when solid sodium reacts with liquid water to produce hydrogen gas and sodium hydroxide. This involves breaking of Na-Na and O-H bonds and formation of new Na-OH and H-H bonds. The net energy change is given by ΔH, the enthalpy change of the reaction.

Note that in exothermic reactions, ΔH is negative, representative of the fact that the system loses energy to the surroundings.

https://brainly.com/question/9799465

#SPJ12

Answer:

D. The amount of heat required to increase the temperature of 1 g of a substance by 1 °C.

Explanation:

Specific heat is defined as the amount of heat needed to raise a unit of mass of a compound by one degree on the temperature scale.

The gram is constituted as a unit of mass, and the degree Celsius as a unit of temperature, therefore, the specific heat can be defined as the amount of heat required to increase the temperature of 1 g of a substance by 1 °C.

The statement that best defines specific heat would be the one that specifies it as the amount of heat required to increase the temperature of 1 g of a substance by 1 °C. Thus, the correct option is D.

By definition, the specific heat capacity of a substance is the quantity of heat required to raise a unit mass (in gram) of the substance by a unit temperature (in °C). The quantity is usually measured in calories or joules per gram per degree Celsius.

1 g of a substance is not the same as 1 mole or 1 L of the same substance. Thus, the best statement that defines the term remains option D

More on specific heat can be found here: https://brainly.com/question/12474790

Final answer:

The pentose phosphate pathway generates NADPH and key metabolites for cell function.

Explanation:

The pentose phosphate pathway (PPP) is a metabolic pathway that runs parallel to glycolysis, generating NADPH and pentoses, as well as ribose 5-phosphate. It plays a crucial role in providing crucial components for nucleotide synthesis and redox regulation in cells.

True statements about the pentose phosphate pathway include glucose being a precursor, carbon atoms from pentose sugars entering glycolytic pathway, and the pathway's high activity in rapidly dividing cells. The conversion of glucose-6-phosphate to ribulose-5-phosphate is a key step in the series of reactions.

Answer:

This atom has 1 valence electron

Explanation:

Step 1: Data given

The ionization energy for the following element is:

I 496

II 4562

III 6912

IV 9544

V 13353

The element that has this ionization energy is sodium (Na)

Sodium has 11 electrons:

2 electrons on the first shell

8 electrons on the second shell

1 electron on the outer shell = 1 valence electron

This atom has 1 valence electron

Answer : The specific heat of substance is [tex]0.235J/g^oC[/tex]

Explanation :

Formula used :

[tex]Q=m\times c\times \Delta T[/tex]

or,

[tex]Q=m\times c\times (T_2-T_1)[/tex]

where,

Q = heat needed = 4.90 kJ  = 4900 J

m = mass of sample = 894.0 g

c = specific heat of substance = ?

[tex]T_1[/tex] = initial temperature  = [tex]-5.8^oC[/tex]

[tex]T_2[/tex] = final temperature  = [tex]17.5^oC[/tex]

Now put all the given value in the above formula, we get:

[tex]4900J=894.0g\times c\times [17.5-(-5.8)]^oC[/tex]

[tex]c=0.235J/g^oC[/tex]

Therefore, the specific heat of substance is [tex]0.235J/g^oC[/tex]

Answer: effective nuclear charge

Explanation: This is because electrons are added to tell same shell at about the same distance from the nucleus

Answer:

The correct option is: B. 13g

Explanation:

Given: Molar mass of iron (II) sulfate: m = 260g/mol,

Molarity of iron (II) sulfate solution: M =  0.1 M,

Volume of iron (II) sulfate solution: V = 500 mL = 500 × 10⁻³ = 0.5 L           (∵ 1L = 1000mL)

Mass of iron (II) sulfate taken: w = ? g

Molarity: [tex]M = \frac{n}{V (L)} = \frac{w}{m\times V(L)}[/tex]

Here, n- total number of moles of solute, w - given mass of solute, m- molar mass of solute, V- total volume of solution in L

∴ Molarity of iron (II) sulfate solution:  [tex]M = \frac{w}{m\times V(L)}[/tex]

⇒  [tex]w = M\times m\times V(L)[/tex]

⇒  [tex]w = (0.1 M)\times (260g/mol)\times (0.5L) [/tex]

⇒  mass of iron (II) sulfate taken: [tex]w = 13 g[/tex]

Therefore, the mass of iron (II) sulfate taken for preparing the given solution is 13 g.

Answer:from the given for ionic are;

Electrons are transferred

Strongest bond

Electrons are lost from metal atoms

Formed from cations and anions

Metallic bond are;

Formed from cations in a sea of electrons

Intermediate bond strength

Formed from metals only

For covalent are;

Weakest bond

Electrons are shared

Formed from metals and nonmetal

Formed from metals and nonmetals

The properties of ionic bonds are it is the strongest bond, formed by metal atom, and in between cation and anion due to transfer of electrons.

Ionic bond is one of the strongest bond in chemistry and it is formed by the high attraction force between cations and anions.

So, properties of ionic bonds are strongest bond, formed by cations & anions through electron transfer.

To know more about ionic bond, visit the below link:
https://brainly.com/question/11638999

The change in entropy, given the 10 kJ of energy needed to melt the ice sculpture at room temperature, works out to be 1.22x10³ J/K. This underscores the substantial amounts of energy required for phase changes.

Given the problem at hand, the energy required to melt the ice sculpture is given by Q = 10 kJ, and the melting temperature of ice (T) is 273 K. The change in entropy can be calculated using the formula ΔS = Q/T. Substituting the provided values, the change in entropy works out to be 1.22x10³ J/K. This calculation emphasizes the concept that phase changes require significant energy. For instance, the energy needed to turn ice into liquid water, as in this example, is immense compared to the energy associated with mere temperature changes.

https://brainly.com/question/35154911

#SPJ12

The change in entropy for the melting ice sculpture at room temperature is calculated to be 34.1 J/K. This represents an increase in disorder due to the melting, an endothermic process that breaks bonds in the ice, allowing the molecules to move freely.

The calculation of the change in entropy for the melting ice sculpture is based on the formula ΔS = Q/T, where Q is the heat required for the phase change (melting), and T is the absolute temperature in Kelvin during the process. Given that Q is 10 kJ (or 10,000 J) and T is room temperature, which is approximately 293 K, we substitute these values into the formula.

So, ΔS = Q/T = 10000 J / 293 K = 34.1 J/K.

This represents the change in entropy of the surroundings when the ice sculpture melts at room temperature. It's important to note that the process of melting is an endothermic process requiring energy to break the bonds in the ice, which contributes to this increase in entropy: the system becomes more disordered as the structured ice lattice becomes freely moving water molecules.

https://brainly.com/question/38781338

#SPJ11

Answer:

The solution remain at a matching level on both sides, because they have the same molarity.

Explanation:

The osmosis is the spontaneous passage of water by a membrane, from a less concentrated solution to a higher concentration solution, to made them reach an equilibrium.

We know that the number of moles of the compound is the same in both sides of the membrane, without knowing the volume it's impossible to identify the molarity, to identify which one is more concentrated. Let's suppose that the volumes are the same.

Because of that, the molarity is the same on both sides of the membrane, so, the solutions are already in equilibrium, then the solution remains at a matching level on both sides.

Answer:

The correct option is: B.) 10.0 x 3600 x (1/96500) x (1/2.00) x 63.5

Explanation:

Given reduction half-reaction: Cu²⁺ + 2e⁻ → Cu

Given: Electrons transferred: n = 2, Current: I = 10.0 A,

Time: t = 60.0 min = 60 × 60 sec = 3600 sec    (∵ 1 min = 60 sec)

Since, Electric charge (Q) = current × time

∴ Q = I × t

⇒ Q = 10.0 A × 3600 sec = (10.0 × 3600) C

Since, one faraday charge is equal to the charge of one mole electrons.

∴ One mole electron = 1 Faraday (F) = 96,500 coulombs (C)

⇒ 1 C = 1 ÷ 96,500 mole electron

∴ (10.0 × 3600) C = [(10.0 × 3600) × (1 ÷ 96,500)] mole electron

Now since 2 mole electrons reduces 1 mole Cu²⁺ to Cu.

So, 1 mole electrons reduces (1/2) mole Cu²⁺

Therefore, moles of Cu²⁺ reduced by [(10.0 × 3600) × (1 ÷ 96,500)] mole electrons = [(10.0 × 3600) × (1 ÷ 96,500)] mole electron × (1 mole Cu²⁺ ÷ 2 mole electron)

=  [(10.0 × 3600) × (1 ÷ 96,500) × (1  ÷ 2)] moles of Cu²⁺

As number of moles = mass taken ÷ molar mass

⇒ mass of copper plated = number of moles × molar mass

As the molar mass of copper = 63.5 g/ mol

∴  mass of copper plated = [(10.0 × 3600) × (1 ÷ 96,500) × (1  ÷ 2)] moles × 63.5 g/mol = [(10.0 × 3600) × (1 ÷ 96,500) × (1  ÷ 2) moles × 63.5] g

Therefore, the mass of copper plated = [(10.0 × 3600) × (1 ÷ 96,500) × (1  ÷ 2) moles × 63.5] g

In Boron Neutron Capture Therapy (BNCT), the nuclear reaction involves boron-10 absorbing a neutron, leading to the emission of an alpha particle, lithium ion, and gamma radiation. This reaction selectively deposits high-energy particles within tumor cells, maximizing damage to cancerous tissue while sparing normal cells. The main equation is [tex]\(^{10}_{5}B + ^{1}_{0}n \rightarrow ^{11}_{5}B^* \rightarrow ^{4}_{2}\alpha + ^{7}_{3}Li + \gamma\)[/tex].

Boron Neutron Capture Therapy (BNCT) is a cancer treatment that involves the use of boron-10 (10B) compounds targeted to tumor cells. The key nuclear reaction in BNCT occurs when boron-10 absorbs a low-energy neutron (10n). This results in the formation of an excited boron-11 (11B) nucleus, which promptly undergoes a nuclear reaction. The boron-11 nucleus decays into an alpha particle (42α or 42He) and a lithium-7 ion, releasing gamma radiation (γ) in the process.

The nuclear reaction can be represented as follows:

[tex]\[ ^{10}_{5}B + ^{1}_{0}n \rightarrow ^{11}_{5}B^* \rightarrow ^{4}_{2}\alpha + ^{7}_{3}Li + \gamma \][/tex]

In this equation, [tex]\(^{10}_{5}B\)[/tex] represents boron-10, [tex]\(^{1}_{0}n\)[/tex] represents a neutron, [tex]\(^{11}_{5}B^*\)[/tex] is the excited boron-11 nucleus, [tex]\(^{4}_{2}\alpha\)[/tex] is the alpha particle, [tex]\(^{7}_{3}Li\)[/tex] is the lithium-7 ion, and [tex]\(\gamma\)[/tex] is the gamma radiation.

The key aspect of BNCT is that the alpha particle and lithium ion released during this nuclear reaction have high linear energy transfer (LET) and are ejected within a very short range. As a result, the majority of the deposited energy occurs within the tumor cell containing the original boron-10 atom. This selective deposition of high-energy particles within the tumor cells aims to maximize the damage to cancerous tissue while minimizing harm to surrounding normal tissues. The success of BNCT relies on achieving a higher concentration of boron-10 in tumor cells compared to normal tissues, ensuring an effective and targeted treatment approach.

Answer:

mL of NaOH required =29.9mL

Explanation:

Let us calculate the moles of vitamin C in the tablet:

The molar mass of Vitamin C is 176.14 g/mole

[tex]moles=\frac{mass}{molarmass}=\frac{500mg}{176.14}=\frac{0.5}{176.14}=0.0028[/tex]

Thus we need same number of moles of NaOH to reach the equivalence point.

For NaOH solution:

[tex]moles=MolarityXvolume=0.095Xvolume[/tex]

[tex]0.00283=0.095Xvolume[/tex]

[tex]volume=0.0299L=29.9mL[/tex]

Answer:

The final product of the reaction is (2S,3S)-2-ethoxy-3-methylpentane.

Explanation:

The given reaction undergoes [tex]S_{N}2[/tex]  mechanism in which the nucleophile attacks the backside and it is substituted by the elimination of bromine.

Due to the backside attack of nucleophile , the inverse in stereo-chemistry is observed.

After the substitution of ethoxy group, the configuration is assigned according to the priority it shows clock wise direction(R) - configuration.

When hydrogen faces the front side , it results shows inverse configuration i.e, S- configuration.

The chemical reaction is as follows.

The major organic substitution product for (2R,3S)-2-bromo-3-methylpentane with a nucleophile would be (2R,3S)-2-hydroxy-3-methylpentane, assuming the nucleophile as '-OH'. The stereochemistry remains the same.

The major organic substitution product when (2R,3S)-2-bromo-3-methylpentane reacts with a nucleophile would be (2R,3S)-2-hydroxy-3-methylpentane. This is because the nucleophile attacks the bromine atom, which is an electronegative element and a good leaving group. It will be replaced by the nucleophile in the reaction. Since we don't know the identity of the nucleophile in this question, let's consider it as '-OH', a common nucleophile. The stereochemistry of the resulting product, (2R,3S)-2-hydroxy-3-methylpentane, remains the same as the original compound since the substitution takes place in a stereospecific manner. Please keep in mind, that the nature of the actual product could vary depending on the specific nucleophile used.

https://brainly.com/question/32308722

#SPJ12

The major organic substitution product will have a different substituent at the chiral carbon.

The given organic substrate is (2R,3S)-2-bromo-3-methylpentane. When this compound reacts with a nucleophile, a substitution reaction takes place. In this case, we need to consider the stereochemistry of the product formed.

The nucleophile replaces the bromine atom, forming a new bond with the carbon atom. In this case, we have a chiral carbon, so the stereochemistry must also be taken into account. The final major organic substitution product will have a different substituent at the chiral carbon.

In order to determine the exact product, we need to know the specific nucleophile being used. Can you provide that information?

https://brainly.com/question/29382322

#SPJ11

Answer:

D) Oxygen is oxidized and hydrogen is reduced.

Explanation:

The electrolysis of water is the decomposition of water ( as the name suggests) of water into hydrogen and oxygen. The general equation is

2 H₂O(l)  ⇒ 2 H₂ (g) + O₂ (g)

The hydrogen atom in the water molecule has been reduced since its oxidation snumber goes from  1⁺ to 0, and the oxygen has oxidized from 2⁻ to 0  , and in the balanced equation. The overall exchange of electron is 4.

Answer: D

Explanation:

Electrolysis of water which is also called water splitting, is the decomposition of water into oxygen and hydrogen gas when an electric current is passed through it, from a platinum electrode.

Pure water (H2O) is used to produce hydrogen gas (H2), which is fuel, and breathable oxygen gas(O2).

Hydrogen is collected at cathode and oxygen is collected at anode.

Chemical reaction

2 H2O(l) → 2 H2(g) + O2(g)

In the reactant H20, the oxidation state of Hydrogen is (+1) the oxidation state of Oxygen is (-2)

In the products, the oxidation number of elements in the uncombine state is zero so, the oxidation state of Hydrogen is 0 and Oxygen is 0.

Therefore Hydrogen is reduced (from +1 to 0)and oxygen is oxidized (from -2 to 0)

The half reaction are:

Reduction: 2 H+(aq) + 2e− → H2(g)

Oxidation: 2 H2O(l) → O2(g) + 4 H+(aq) + 4e−

Answer:

The correct option is: C.) Octahedral

Explanation:

Iodine pentafluoride (IF₅) is an inorganic interhalogen compound in which the oxidation state of iodine is +5 and the oxidation state of fluorine is (-1).

In this molecule, iodine is sp³d² hybridized and covalently bonded to five fluorine atoms. So there are 5 bond pair of electrons and 1 lone pair of electron around iodine.

Thus the steric number = 6

According to the VSEPR theory, the electron pair arrangement of a molecule with steric number 6 is octahedral.

Therefore, electron pair arrangement around iodine in IF₅ molecule is octahedral.

The molecule IF5 (Iodine Pentafluoride) has a square pyramidal electron pair arrangement around the central atom, Iodine, resulting from its electron configuration. In this arrangement, five fluorine atoms surround iodine in the shape of a pyramid with a square base. Therefore, the answer would be D) Square Pyramidal.

The molecule IF5 (Iodine Pentafluoride) follows the square pyramidal electron pair arrangement around the central atom (Iodine). In this arrangement, five Fluorine atoms are arranged around Iodine in the shape of a pyramid with a square base. This structure comes from the electron configuration of the central atom. Iodine has seven valence electrons, five of which are shared with the Fluorine atoms (forming covalent bonds), and the remaining two occupy a lone pair of non-bonding electrons. Therefore, the answer would be D) Square Pyramidal.

https://brainly.com/question/31844522

#SPJ6