List the number of each type of atom on the left side of the equation hbr(aq)+2naoh(aq)→2nabr(s)+h2o(l)

Answer:

∆G° = -185 kJ

Explanation:

First, use the half-reaction method:

OX: Cd ⟶ Cd2+ + 2e- where E° = -0.40 V (anode)

RED: 2MnO-4 + e- ⟶ 2MnO2-4 where E° = 0.56 V (cathode)

Balance the chemical equation with the correct stoichiometric coefficients:

2 × (2MnO-4 + e- ⟶ 2MnO2-4) = 4MnO-4 + 2e- ⟶ 4MnO2-4

1 × (Cd ⟶ Cd2+ + 2e-) = Cd ⟶ Cd2+ + 2e-

Cancel out e- on both sides to get:

4MnO-4 + Cd ⟶ 4MnO2-4 + Cd2+

Using this balanced equation, we can determine:

number of moles of electrons exchanged in the cell reaction, n = 2

E°cell = E°cathode - E°anode = 0.56 - (-0.40) = 0.96 V

F, Faraday's constant: 96485 / mol e-

∆G° = -nFE°cell = -(2)(96485)(0.96)

∆G° = -185251.2 J = -185 kJ

Activation energy simply means the minimum amount of energy needed for the particles to have a successful reaction when they collide. There are two basic factors necessary for a reaction to just take place.

Carbon has a higher boiling point than [tex]CH_4[/tex].

The boiling point of a substance is defined as the temperature at which the vapor pressure of the liquid becomes equal to the pressure surrounding the liquid and the liquid changes into vapor. This point of liquid varies depending on the surrounding environmental pressure.

The boiling point is the temperature at which the pressure exerted by the surroundings on a liquid is equal to the pressure exerted by the liquid's vapor, in which case the liquid changes to vapor without additional heat raising the temperature.

For above given example,

[tex]CH_4[/tex] is a gas at room temperature having a boiling point of -258.7 F (-161.5 C) which is why it’s boiling point is so low while Carbon is a solid at room temperature having a boiling point of 8,721 F (4,827 C)

Thus, Carbon has a higher boiling point than [tex]CH_4[/tex].

Learn more about Boiling point, here:

https://brainly.com/question/2153588

#SPJ5

The ideal gas relates to the pressure, temperature, pressure, and mole of the gas. The volume of the sample at 423 K and 1 atm is 81.64L.

Charles law gave the relation between the temperature and the volume of gas. According to him, the volume of the gas is directly proportional to the temperature of the gas.

Given,

Initial volume = 75.9 L

Initial temperature = 300 K

Final volume = ?

Final temperature = 423 K

The relation between the temperature and the volume of the two gases is shown as:

[tex]\rm \dfrac{V_{1}}{T_{1}} = \rm \dfrac{V_{2}}{T_{2}}[/tex]

Substituting values in the above equation:

[tex]\begin{aligned}\rm V_{2}& = \rm \dfrac{T_{2}V_{1}}{T_{1}}\\\\&= \dfrac{57.9\times 423}{300}\\\\&= 81.64 \;\rm L \end{aligned}[/tex]

Therefore, 81.64 L is the final volume at 423 K.

Learn more about Charles law here:

https://brainly.com/question/20212888

Explanation:

Longest wavelengths of light that can cleave the bonds in elemental nitrogen

Energy to cleave 1 mol N-N bond = 945 kJ/mol = 945000 J/mol

1 mol= [tex]6.022\times 10^{23}[/tex]

Energy to break 1  N-N bond = [tex]\frac{945000 J/mol}{6.022\times 10^{23} mol^{-1}}=1.56\times 10^{-18} J[/tex]

[tex]E=\frac{hc}{\lambda }[/tex]

[tex]\lambda =\frac{6.626\times 10^{-34}J s\times 3\times 10^{8} m/s}{1.56\times 10^{-18} J}=12.74\times 10^{-8} m=127.4 nm[/tex]

Longest wavelengths of light that can cleave the bonds in elemental nitrogen is 127.4 nm.

Similarly

For oxygen:

Energy to cleave 1 mol O-O bond = 498 kJ/mol = 498000 J/mol

Energy to break 1  O-O bond = [tex]\frac{498000 J/mol}{6.022\times 10^{23} mol^{-1}}=8.26\times 10^{-19} J[/tex]

[tex]E=\frac{hc}{\lambda }[/tex]

[tex]\lambda =\frac{6.626\times 10^{-34}J s\times 3\times 10^{8} m/s}{8.26\times 10^{-19} J}=2.406\times 10^{-7}m=240.6 nm[/tex]

Longest wavelengths of light that can cleave the bonds in elemental oxygen is 240.6 nm.

For fluorine

Energy to cleave 1 mol F-Fbond = 159 kJ/mol = 159000 J/mol

Energy to break 1  F-F bond = [tex]\frac{159000 J/mol}{6.022\times 10^{23} mol^{-1}}=2.64\times 10^{-19} J[/tex]

[tex]E=\frac{hc}{\lambda }[/tex]

[tex]\lambda =\frac{6.626\times 10^{-34}J s\times 3\times 10^{8} m/s}{2.64\times 10^{-19} J}=7.529\times 10^{-7}m=752.9 nm[/tex]

Longest wavelengths of light that can cleave the bonds in elemental fluorine is 752.9 nm.

Answer: water and ammonia or (NH3)

When copper reacts with nitric acid, then cooper nitrate, water, and nitrogen dioxide are produced. In this reaction, copper gets oxidized by nitric acid.

Oxidation is a type of chemical reaction involving the sharing of electrons and an increase or decrease of the oxidation number. When a chemical species loses an electron, it is said to be oxidized.

The balanced chemical reaction is given as:

Cu(s) + 4HNO₃(aq) → Cu(NO₃)₂(aq) + 2NO₂(g) + 2H₂O(l)

In the reaction, copper forms copper nitrate, and its oxidation changes from 0 to +2. On the other hand, nitrate species get reduced to nitrogen dioxide and change the state from +5 to +4.

Therefore, copper gets oxidized by nitric acid.

Learn more about oxidization here:

https://brainly.com/question/9256742

#SPJ2

By dissolving 8.56 g of sodium acetate in 750.0 mL of water, we find the molarity of the solution to be 0.1391 M. This calculation involves determining the number of moles and the volume in liters. Dividing the moles of solute by the volume of solution gives the molarity.

To find the molarity of a solution made by dissolving 8.56 g of sodium acetate in water and diluting to 750.0 mL, you first need to determine the number of moles of sodium acetate. The molar mass of sodium acetate (CH3COONa) is 82.03 g/mol.

Number of moles = mass / molar mass

Number of moles = 8.56 g / 82.03 g/mol = 0.1043 moles

Next, convert the volume of the solution from mL to L:

Volume = 750.0 mL = 0.750 L

Finally, calculate the molarity (M) of the solution:

M = moles of solute / liters of solution

M = 0.1043 moles / 0.750 L = 0.1391 M

Therefore, the molarity of the solution is 0.1391 M.

The lowest energy Lewis structure for nitrogen oxide (NO) involves one nitrogen and one oxygen atom sharing a total of 11 valence electrons with an unpaired electron on Nitrogen. It's an odd-electron molecule with a resonance structure, where the electron distribution is a hybrid average of a single and double bond.

The lowest energy Lewis structure for nitrogen oxide (NO) has one nitrogen atom and one oxygen atom with a total of 11 valence electrons. One of these electrons will remain unpaired, which is typical of chemicals that contain nitrogen. Therefore, the nitrogen has a single unpaired electron, while the oxygen atom is fully paired with two lone pairs and one shared pair.

Nitrogen oxide is an odd-electron molecule, meaning it has an unpaired electron which contributes to its reactive properties. Drawing a correct Lewis structure for such molecules involves the same steps as for other molecules, but there may be some unpaired electrons.

To summarize, nitrogen oxide (NO) has a resonance structure rather than a single Lewis structure, due to the presence of an unpaired electron. The representation of its electron distribution is an average of a single bond and a double bond, illustrated as a resonance hybrid of the individual resonance forms.

https://brainly.com/question/20300458

#SPJ11

Boron and Oxygen, due to their similar electronegativity can form a nonpolar covalent bond. This type of bond is formed when electrons are shared equally between atoms. Sodium and Chlorine, with their contrasting electronegativities, would rather form an ionic bond.

The atom pairs that form a nonpolar covalent bond from the options given would be B and O. Boron (B) and Oxygen (O) come from nonmetals with similar electronegativity, hence they share electrons equally forming a nonpolar covalent bond.

Nonpolar covalent bonds form when two atoms share electrons equally, meaning the electrons spend an equal amount of time around each atom. This could involve two atoms of the same element, like O₂, or atoms of different elements with similar electronegativity, like CH4 (methane).

On the contrary, atoms like Sodium (Na) and Chlorine (Cl), have a large difference in electronegativity, leading to an ionic bond instead of a covalent bond. In such cases, a clearly positive (cation) or negative (anion) charge develops on the atoms.

https://brainly.com/question/14470991

#SPJ6

The correct answer is: E) None of the above  atoms form a nonpolar covalent bond.

For a nonpolar covalent bond to form, the atoms involved must have similar electronegativities, typically seen in diatomic molecules of the same element

Given options:

A) Na and Cl - This forms an ionic bond.

B) C and O - This forms a polar covalent bond.

C) N and Cl - This forms a polar covalent bond.

D) B and O - This forms a polar covalent bond.

Full question

Which pair of atoms forms a nonpolar covalent bond?

A) Na and Cl  

B) C and O  

C) N and Cl  

D) B and O

E) None of the above.

For producing 61 L of [tex]\rm CO_2[/tex], 227.23 grams of  [tex]\rm CaCO_3[/tex]. is required.

Any gas occupies 22.4 L/mol space at STP.

So, 61.0 L of gas will be;

Moles of [tex]\rm CO_2[/tex] = [tex]\rm \frac{61.0}{22.4}[/tex]

Moles of  [tex]\rm CO_2[/tex] = 2.723 moles

From the reaction,

1 mole of [tex]\rm CO_2[/tex] has been produced by 1 mole of [tex]\rm CaCO_3[/tex].

2.723 moles of [tex]\rm CO_2[/tex] has been produced by 2.723 mole of [tex]\rm CaCO_3[/tex].

Mass = [tex]\rm moles\;\times\;molecular\;weight[/tex]

Mass of [tex]\rm CaCO_3[/tex]. = 2.723 [tex]\times[/tex] 100

Mass of [tex]\rm CaCO_3[/tex]. = 227.23 grams.

For producing 61 L of [tex]\rm CO_2[/tex], 227.23 grams of  [tex]\rm CaCO_3[/tex]. is required.

For more information, refer the link:

https://brainly.com/question/20290065?referrer=searchResults

To neutralize 20.0 mL of 0.250 M NaOH, you will need 50.0 mL of 0.100 M HCl.

To determine how much 0.100 M HCl is required to neutralize 20.0 mL of 0.250 M NaOH, we can use the balanced equation for the reaction between HCl and NaOH: HCl(aq) + NaOH(aq) → H2O(l) + NaCl(aq). The mole ratio between HCl and NaOH is 1:1, meaning that 1 mole of HCl reacts with 1 mole of NaOH. We can use this ratio to calculate the amount of HCl needed.

First, find the number of moles of NaOH:

0.250 M NaOH x 0.0200 L = 0.005 moles NaOH

Since the mole ratio between HCl and NaOH is 1:1, we need 0.005 moles of HCl to neutralize the NaOH.

Now, calculate the volume of 0.100 M HCl needed to contain 0.005 moles:

0.005 mol HCl / 0.100 mol/L = 0.050 L = 50.0 mL

Therefore, 50.0 mL of 0.100 M HCl is required to completely neutralize 20.0 mL of 0.250 M NaOH.

https://brainly.com/question/11403609

#SPJ11

The chemical reaction is given as:

[tex]2NaDP^{+} +2H_{2}O\rightarrow 2NaDPH+2H^{+}+O_{2}[/tex]

Here, oxygen is oxidised and [tex]NaDP^{+}[/tex] is reduced. Thus, redox reaction occurs.

For cell reaction, [tex]\Delta G^{o} = -nFE^{o}_{cell}[/tex]          (2)

where, [tex]\Delta G^{o} [/tex] = standard state free energy

n= number of electrons

F= Faraday constant ([tex]96485.33 C/mol[/tex])

[tex]E^{o}_{cell}[/tex] = cell potential

Substitute the value of number of electrons i.e. 2, Faraday constant and cell potential in the formula to determine the value of  [tex]\Delta G^{o} [/tex].

Now, calculate the value of cell potential

[tex]E^{o}_{cell} = E^{o}_{cathode}- E^{o}_{anode}[/tex]           (1)

[tex]E^{o}_{cathode}[/tex] = [tex]-0.324 V[/tex] (standard reduction potential of [tex]NaDP^{+}[/tex])

[tex]E^{o}_{anode}[/tex] = [tex]1.23 V[/tex] (standard reduction potential of [tex]O_{2}[/tex])

Put the above values in formula (1), we get:

[tex]E^{o}_{cell} = -0.324 V-1.23 V[/tex]

= [tex]-1.554 V[/tex]

Now, substitute above value in formula (2)

[tex]\Delta G^{o} = -2\times 96485.33 C/mol \times(-1.554 V) [/tex]  

= [tex]299876.40564 CV/mol[/tex]

Since, one coulomb volt is equal to one joule.

Thus, value of [tex]\Delta G^{o}[/tex] is equal to [tex]299876.40564 J/mol[/tex] or [tex]299.87640564 kJ/mol[/tex]

Answer:

The procedure by which soil, land, or rock get slowly worn away by the natural elements like wind or water is known as erosion. The landforms refer to the natural characteristics found on the surface of the Earth that exhibit different shape and origin. The landforms can be destroyed and created by erosion.  

The landforms created by the process of erosion are known as fluvial erosion landforms. With the passing of water across the land, the sediments and other kinds of natural debris also get carried with it. With time, the gathering of the debris and sediments generate deposits that ultimately turn into a landform. Some of the examples of fluvial erosion landforms comprise flood plains, sandbars, and levees.  

The population of the planet is constantly increasing, and this growth can have many effects on the environment and the economy of the world. For example, as the world population rises, the pressure mounts on the agricultural sector to feed the millions of extra mouths. In predicting the rise of the world population, scientists use a number of variables.

Fertility Rate

The factor which affects the growth of the population in the biggest way is the fertility rate. The fertility rate is typically measured by the number of children per one woman of child-bearing age. If the fertility rate is larger than 2, the rule of thumb is that the population should rise, as there are more children than their parents. On the other hand, if this ratio is below 2, the population of the region may be destined for a decline.

Mortality Rate

A key factor affecting the growth of the population is the death, or mortality, rate. Just as the birth of new people increases the population size, deaths decrease it. The factors that affect the mortality rate include the availability and affordability of quality health care and lifestyle habits – for example, whether they smoke or do physical exercises regularly.

Immigration and Emigration

Cross-border migration is the act of people moving from one country to another. It affects the population size of both the host and destination countries. Emigration is caused by a number of factors, such as fleeing war, finding education, seeking new jobs or joining family members. When a person emigrates from a country, its population shrinks. When someone moves to a country from another place, it is known as immigration. Whether or not a person is allowed to immigrate is controlled by the country that will host this person.

Government Restrictions

There are some people in the world, including politicians, who believe that some countries need to have a birth rate restriction -- in fact, China already has its widely-known one-child policy. Such a restriction would prevent couples from being able to have more than the restricted amount of children. The argument goes that this type of restriction would cause fewer resources to be used and prevent overpopulation.

Population growth rate is affected by several factors, including the birth and death rates, life expectancy, and the age structure of the population. Other factors include human migration and improvements in public health and sanitation.

A major factor affecting population growth rate is the birth and death rates. When birth rates exceed death rates, population size increases. Conversely, when death rates exceed birth rates, population size decreases. Life expectancy also plays an important role. The length of time individuals remain in the population impacts local resources, reproduction, and the overall health of the population.

Another factor is related to the age structure of a population, which is the proportion of a population in different age classes. Rapid growth countries often have a pyramidal age structure, showing many young, reproductive-aged individuals. On the other hand, areas with slow growth or zero growth tend to have a greater proportion of older individuals.

Additionally, other factors affecting human population growth include migration and improvements in public health and sanitation. The development and use of antibiotics and vaccines have decreased the prevalence of infectious disease, allowing human population to grow.

https://brainly.com/question/16013460

#SPJ2

The  skeletal structures of a 2° alkyl bromide with two  stereogenic centers is shown below.

A carbon atom in a molecule that is linked to four separate substituents is referred to as a stereogenic center, also referred to as a chiral center. Because secondary carbon atoms normally have two identical alkyl groups and two hydrogen atoms linked to them.

The two of the substituents (two alkyl groups) are the same. Tetrahedral carbon compounds with four distinct substituents are frequently where chirality occurs.

Learn more about 2° alkyl bromide :https://brainly.com/question/34427871

#SPJ4

Answer: Option (D) is the correct answer.

Explanation:

It is known that metals are the substances which hold excess number of electrons and hence they need to lose electrons in order to gain stability.

For example, potassium is a metal with atomic number 19 and its electronic configuration is 2, 8, 8, 1.

So, it needs to gain stability and hence, it easily loses its one valence  electron to acquire a positive charge as [tex]K^{+}[/tex].

Thus, we can conclude that in general, metals react by losing valence electrons.

Mechanical waves require a medium to travel. If there is no medium, the mechanical wave doesn't travel. Since, they are waves; they have a wavelength, frequency, speed and also amplitude. The speed depends on the medium and type of the wave. An example for the mechanical waves is sound wave.

2. E = hf, where E is energy, h is plank constant and f is the frequency. Hence, if the frequency is high, then the energy is high. 

v = fλ , where v is the speed, f is the frequency and λ is the wavelength. If the frequency is high, then the wavelength is low.

According to the given choices, gamma rays have the shortest wavelength and highest energy on electromagnetic spectrum.

3. The wavelength of X-rays are smaller the wavelength of infrared.

According to the v=fλ, lower the wavelength, then higher the frequency.  According to the E = hf, if the frequency is high, then the energy is also high. 

Hence, the correct answer is "d"

4. In a longitudinal wave (compression wave) the particles of a matter move parallel. 

There are two types of waves according to the particle movement. They are transverse waves and longitudinal waves. In transverse waves, the particles of the medium move perpendicular to the direction of the wave and longitudinal waves have parallel movement of particles to the direction of wave.

5. In regard to spend of sound, sound travels slowest in gases.

Solids have the highest speed of sound while gases have the lowest. This is because of the particle arrangement of each phase. Solid phase has very tightly packed particle arrangement and due to that the transfer of sound wave in easy than in gases.

Answer:19.9

Explanation: make sure correct significant figures with psi

The average kinetic energy of hydrogen molecules at 100 K with three degrees of freedom can be calculated using the formula kavg = 3/2 * k * T, where k is Boltzmann's constant and T is the temperature in Kelvin.

The average kinetic energy kavg of hydrogen molecules at a temperature of 100 K with three degrees of freedom can be calculated using the formula:

kavg = 3/2 * k * T

where k is Boltzmann's constant (1.38 x 10^-23 J/K) and T is the temperature in Kelvin. Plugging in the values:

For an atom, the atomic number is equal to number of protons and number of electrons. Mass number is sum of number of protons and neutrons in nucleus of an atom. Atomic number is denoted by symbol Z and mass number is denoted by symbol A.

The atomic number of strontium is Z=38 and mass number is A=90.

Now, [tex]Z=n_{p}=n_{e}=38[/tex]

Also, [tex]A=n_{p}+n_{n}=90[/tex]

Putting the value of [tex]n_{p}[/tex] in above equation,

[tex]A=38+n_{n}=90[/tex]

Or,

[tex]n_{n}=90-38=52[/tex]

Thus, number of neutrons are 52.

Now, after losing two electrons, number of protons and neutrons remains the same but number of electrons becomes 38-2=36

Therefore, a strontium-90 atom that has lost 2 electrons has 38 protons, 52 neutrons and 36 electrons.

A strontium-90 atom that has lost two electrons has 38 protons, 52 neutrons, and 36 electrons.

A strontium-90 atom originally has 38 protons, 52 neutrons, and 38 electrons. If it has lost 2 electrons, then it has 36 electrons left. So, a strontium-90 atom that has lost 2 electrons has 38 protons, 52 neutrons, and 36 electrons. The atomic number of strontium is 38, which tells us its number of protons, and by subtracting this number from the atomic mass, we get the number of neutrons. The number of electrons in a neutral atom should be equal to the number of protons, but if the atom becomes an ion and loses electrons in the process, the number of electrons decreases.

https://brainly.com/question/35522980

#SPJ6