You can see that an apple is red because the red wavelength is ______________off the apple and all other colors are __________________. *

A. absorbed; reflected
B. reflected; absorbed
C. transmitted; reflected
D. transmitted; absorbed

Answers

Answer 1
Your answer will be (B).Hope you have a great life. PS.Can you mark brainliest
Answer 2

The complete statement is -

" You can see that an apple is red because the red wavelength is  reflected off the apple and all other colors are absorbed ".

What is Absorption? What is Absorbance of light? What is Beer - Lamberts Law?Absorbance is defined as the logarithm of the ratio of incident to transmitted radiant power through a sample (excluding the effects on cell walls).The term absorption refers to the physical process of absorbing light, while absorbance does not always measure only absorption; it may measure attenuation (of transmitted radiant power) caused by absorption, as well as reflection, scattering, and other physical processesBeer - Lamberts Law states that if I{o} is the intensity of the light at the beginning of the travel and  I{s} is the intensity of the light detected after travel of a distance {d}, the fraction transmitted {T} is given by -

       [tex]${\displaystyle T={\frac {I_{s}}{I_{0}}}=\exp(-\mu d)}[/tex]

Given is the statement as -

You can see that an apple is red because the red wavelength is ______________off the apple and all other colors are _________________".

The complete statement will be -

You can see that an apple is red because the red wavelength is  reflected off the apple and all other colors are absorbed.

It is because eyes can perceive only the reflected rays {that enter our eyes} and not the absorbed rays.

Therefore, the complete statement is -

" You can see that an apple is red because the red wavelength is  reflected off the apple and all other colors are absorbed ".

To solve more questions on reflectance, visit the link below-

brainly.com/question/1041084

#SPJ6


Related Questions

A 60 Watt light bulb runs for 120 seconds. How much energy does it use?

Answers

ENERGY = POWER X TIME
=60 X 120=7200KWh

Which one of the following statements best describes the just world hypothesis?

Answers

The just-world hypothesis is the assumption that a person's actions are inherently inclined to bring morally fair and fitting consequences to that person, to the end of all noble actions being eventually rewarded and all evil actions eventually punished. 

The statement that best describes the just world hypothesis is people deserve what happens to them, whether good or bad. The correct option is a.

What is a hypothesis?

A hypothesis is a testable declaration about the relationship among two or more variables or a suggested explanation for some observed phenomenon in a scientific context.

A hypothesis is an assumption formed based on evidence. This is the first step in any investigation that converts research questions into predictions. It consists of variables, a population, and the relationship between the variables.

A hypothesis is a statement rather than a question. The scientific question in your project is not your hypothesis. The hypothesis is a well-informed, testable prediction of what will occur.

A scientific paper should begin with a clear statement of the hypothesis. This helps the reader understand the issue. People deserve what happens to them, whether good or bad, according to the statement that best describes the just world hypothesis.

Thus, the correct option is a.

For more details regarding hypothesis, visit:

https://brainly.com/question/29519577

#SPJ2

Your question seems incomplete, the missing options are:

a. People deserve what happens to them, whether good or bad.

b. If people act with integrity, they contribute to a just world.

c. The world is just, but some people don't think it is.

d. People who work hard are superior to those who are lazy. User: If you exhibit a high level of psychological hardiness, you're probably the type of person who

How long would it take for a ball dropped from the top of a 576-foot building to hit the ground? round your answer to two decimal places?

Answers

If a ball is if a ball is dropped from a 576ft building it would take about 8 seconds for it to hit the ground.

Jake uses a fire extinguisher to put out a small fire. When he squeezes the handle, the flame rettardant is released from the extinguisher with considerable force. As a result, Jake has to reinforce his grip on the extinguisher to hold it in place as it pushes back into his hands. The projectile in this scenario is the . The recoil in this scenario is the . The force on the flame rettardant is the force on the extinguisher. The mass of the flame rettardant is the mass of the extinguisher. The acceleration of the flame rettardant is the acceleration of the extinguisher.

Answers

The projectile in this scenario is the flame r.

The recoil in this scenario is the extinguisher.

The force on the flame r is equal to the force on the extinguisher.

The mass of the flame r is less than the mass of the extinguisher.

The acceleration of the flame r is greater than the acceleration of the extinguisher.

Answer:

The projectile in this scenario is the flame r.

The recoil in this scenario is the extinguisher.

The force on the flame r is equal to the force on the extinguisher.

The mass of the flame r is less than the mass of the extinguisher.

The acceleration of the flame r is greater than the acceleration of the extinguisher.

When a boat moves through the water, the waves in front of the boat bunch up, while the waves behind the boat spread out. this is an example of?

Answers

Answer: Doppler Effect

Doppler Effect can be described as the change in wavelength of a wave like upward shift in frequency for an object whom is approaching and an apparent downward shift in frequency for observers from whom the source is receding. This effect can be observed when a boat moves through the water then the waves in front bunch up while the waves behind the boat spread out.

Vivisection refers to the live dissection of animals or the use of live animals for experimental research. Please select the best answer from the choices provided T F

Answers

the answer to this question is true

Answer:

The given statement is true.

Vivisection derives from the Latin words "vivus" which means "alive" and "sectio" which means cutting.

Thus, it refers to the surgery or dissection of living organism conducted for the experimental purposes.

It not only helps in medical and biological research but also in education and training of the veterinarians and doctors.

During the Pleistocene, a land bridge connected Alaska and Asia. What could have caused this bridge to from? the ending of an ice age the beginning of an ice age the erosion of the Alaskan coastline the erosion of the Asian coastline

Answers

The appropriate answer is b. the ending of an ice age. The Pleistocene epoch began 1.8 million years ago. The last ice age is known as the Wisconsin Glaciation, which peaked around 18,000 years ago. During this period there was more than three times the amount of ice on Earth today.
The continents were larger because water was locked in ice and so the shelves surrounding the continents were exposed. The land bridge between Asia and Alaska was created because of this drop in sea level.

The correct answer is beginning of ice age.

During the time of ice age, the supply of water of locked in the ice of the glaciers.

The level of sea worldwide decreased and the land came out of the sea and joined the two continents.

The environment of the Bering bridge was very dried so it remained a dried and there were no glaciers during the whole ice age.

Which of the following measurements is used to measure the distance between astronomical bodies?

Speed of light
Speed of sound
Speed of spacecraft
Speed of rotation of Earth

Answers

combination   of  the orbit of the earth  and the speed of light.
distances   are measured in light years.

Generally we use speed of light to measure the distance between two astronomical bodies

Because astronomical bodies are very far from each other

and we use light year as the unit of distance for large distances

1 light year is the distance covered by light in one year

so speed of light is correct option here

How is it possible you can feel heat from the sun?

Answers

there are three ways by which we can transfer heat from one place to other

1. Conduction

In this method of heat transfer heat can be transferred from one place to other without actual movement of medium molecules. This is possible in solid conducting mediums

2. Convection

Here heat energy is carried away along with the medium molecules where medium molecules can move from one place to other while heat is transferred. It is possible in liquid and gas but not possible in solids

3. Radiation

In this mode of heat transfer we do not require any medium and here heat transferred by electromagnetic waves

So we can feel heat from sun in form of electromagnetic waves and it is the fastest way to transfer the heat also it do not require any medium

Two devices with capacitances of 25 μf and 5.0 μf are each charged with separate 120 v power supplies. calculate the total energy stored in the two capacitors. your answer submit

Answers

The energy stored in a capacitor is given by
[tex]U= \frac{1}{2} CV^2[/tex]
where C is the value of the capacitance while V is the voltage difference applied to the capacitor.

Let's calculate the energy of the first capacitor:
[tex]U_1 = \frac{1}{2} (25\cdot 10^{-6}F)(120 V)=1.5 \cdot 10^{-3}J[/tex]

And now the energy of the second capacitor:
[tex]U_2 = \frac{1}{2} (5 \cdot 10^{-6}F)(120 V)=3 \cdot 10^{-4}J[/tex]

So, the total energy stored in the two capacitors is
[tex]U=U_1 +U_2 = 1.8 \cdot 10^{-3}J[/tex]

Answer:

Total energy stored in both is 0.0018J

Explanation:

Formula to calculate the total energy stored between two capacitors = 1/2CV²

Energy stored the First Capacitor = 1/2 × 25× 10⁻⁶f × (120)²

Energy stored = 0.0015J

Energy stored in the second Capacitor = 1/2 × 5× 10⁻⁶f × (120)²

Energy stored = 0.0003J

Total Energy stored = Energy stored in capacitance 1 + Energy stored in Capacitor 2

= 0.0015J+ 0.0003J

= 0.0018J

alcohol use for can cause feel alcohol syndrome in the unborn fetus? true or false

Answers

this answer is true

Answer:

True

Explanation:

In an electron cloud an element that is farther away from the nucleus has

Answers

Hello,

Here is your answer:

The proper answer to this question is that "it has higher energy than a electron cloud closer to the nucleus".

If you need anymore help feel free to ask me!

Hope this helps! 

What should a sailboat operator do when approaching a PWC head-on

Answers

In accordance with the International Regulation for the prevention of collisions at sea:

1.- A sailing boat has a passing preference over a motorized boat, except when the motor boat is limited by its draft.

2.- The sailboat must maintain its course and speed.

3.- If it is evident that the PWC does not respond, the sailboat must sound the warning signal, and change its course to starboard.

4.- All actions must be taken as soon as possible.

5.- If a sailboat is using its engine, the situation changes, and in that case, both ships must alter to starboard.

Final answer:

When a sailboat operator approaches a PWC head-on, the operator should change course to starboard (right), while keeping the vessel at a safe speed and maintaining a proper observation to assess risk of collision.

Explanation:

When a sailboat operator is approaching a PWC (Personal WaterCraft) head-on, the operator should follow rules regarding right of passage, which are set in place to minimize the risk of collision. These rules are part of the numerous international maritime navigation laws.

The primary method of avoiding collision is by steering to the right, or 'starboard', when it is safe to do so. The rule 'starboard to starboard' means that both vessels should deviate their course to starboard. This is akin to 'keep to your right' rule on the road.

However, before attempting any manoeuvre, it is crucial to maintain a safe speed and have a proper lookout for assessing risk of collision. One should use all available ways like sight, sound or radar to ascertain any risk.

Learn more about Sailboat Operator here:

https://brainly.com/question/32266105

#SPJ11

what is the gravitational potential energy relative to the ground of a 1.0-kg box at the top of a 50-m building ?

Answers

''Gravitational PE is calculated as mgh where m is a mass, g is the acceleration due to gravity, and h is a perpendicular height. 
So in this case PE = 1*9.81*50 = 490.5J 
I am assuming that 50m is the height of the building.''

hope this helps

The gravitational potential energy relative to the ground of a 1.0-kg box at the top of a 50-m building is  490 Joule.

What is  gravitational potential energy?

The energy that an item has or acquires when its location changes as a result of being in a gravitational field is known as gravitational potential energy. Gravitational potential energy can be defined as an energy that has a connection to gravitational force or gravity.

Mass of the box = 1.0 kg.

Height of the box relative to the ground = 50 meter.

Acceleration due to gravity = 9.8 m/s²

Hence,  the gravitational potential energy is = Mass of the box × Height of the box × Acceleration due to gravity

= 1.0 kg ×  50 meter × 9.8 m/s².

= 490 Joule.

Learn more about gravitational potential energy here:

https://brainly.com/question/19768887

#SPJ5

What is the period of a wave if the wavelength is 100 m and the speed is 200 m/s?

(a) 200,000 s

(b) 2 s

(c) 0.5 s

(d) 100 s

Answers

Uh it's c) 0.5 :), and for some reason i need to write 20 characters to explain it well, okay you need to divide speed/wavelength, that's it
It's 0.5 I thought it was 2 but I was wrong it's 0.5

How was Uranus different from most other planets

Answers

Its axis is tilted on the side.
Hello,

Here is your answer:

The proper answer to this question is "Uranus is tilted 90 degrees and rotates on its side". 

If you need anymore help feel free to ask me!

Hope this helps!

Lee pushes horizontally with a force of 75 n on a 36 kg mass for 10 m across a floor. calculate the amount of work lee did. answer in units of j.

Answers

To find work, you use the equation: W = Force X Distance X Cos (0 degrees)
Following the Law of Conservation of Energy, energy cannot be destroyed nor created.

So you would do 75 N x 10m x Cos (0 degrees)= 750 J
Final answer:

The amount of work Lee did is 750 Joules.

Explanation:

Work is calculated by multiplying the force exerted on an object by the distance it is moved. In this case, Lee exerts a horizontal force of 75 N on a 36 kg mass, moving it for a distance of 10 m. Therefore, the work done by Lee can be calculated as:

Work = Force × Distance

Work = 75 N × 10 m

Work = 750 J

So, the amount of work Lee did is 750 Joules.

If you have to apply 40n of force on a crowbar to lift a rock that weights 400n, what is the actual mechanical advantage of the crowbar

Answers

The mechanical advantage is defined as the ratio between the force produced by a machine and the force applied in input:
[tex]MA= \frac{F_{out}}{F_{in}} [/tex]
For the crowbar of the problem, the force applied in input is 40 N, while the force produced in output is equal to the weight of the rock that is lifted, so 400 N. Therefore, the mechanical advantage is
[tex]MA= \frac{400 N}{40 N}=10 [/tex]

The actual mechanical advantage of the crowbar used to lift a 400N rock with a 40N effort is 10.

The actual mechanical advantage of a crowbar is calculated by dividing the load force by the effort force. In this case, if a 400N rock is lifted using a crowbar with an effort of 40N, the mechanic advantage is calculated as follows:

Actual Mechanical Advantage (AMA) = Load Force (N) / Effort Force (N)

AMA = 400N / 40N

AMA = 10

Therefore, the actual mechanical advantage of the crowbar is 10, which means that the force applied is multiplied by 10 times when lifting the rock.

When Jamie removes a woolen cap, his hair develops an excess of static charge Which of these BEST explains this phenomenon?

Answers

The only explanation here is that while he was wearing the woolen cap, which is constantly rubbing his/her hair, it already generated static. Wool is a material which produces static when rubbed to hair. As a result, when the woolen cap was removed, it produced an excess static charge.
The only clarification here is that whereas he was wearing the woollen cap, that is continually rubbing his/her hair, it already generated statically. Wool may be a material that produces static once rubbed to hair. As a result, once the woollen cap was removed, it made an associate excess static charge.

Explanation:

Hair gets packed with static within the wintertime because of lack of wetness within the air. moisture is contributory for volume, movement and curl. additionally, the heat from your significant winter attire and overclothes like scarves, woolly collars and jackets can cause fly-away strands

Static electricity is that the results of an imbalance between negative and positive charges in an object. These charges will build upon the surface of an object until they notice the simplest way to be free or discharged. a technique to discharge them is through a circuit.

The rubbing of bound materials against each other will transfer negative charges or electrons.

The voltage of electricity traveling away from a power plant is very high. How high may it be? Why is the voltage so high?

Answers

- The voltage travelling away from a power plant through transmission lines is very high, and it is typically of hundreds of kilovolts (typical values are between 138 kV and 765 kV).

- The main reason to use these high values of voltage is to reduce power dissipation.
In fact, the cables that are used to transmit electricity have a certain resistance R which is fixed. The power generated from the power plant and that should be transmitted through the lines is P, and it is also fixed. 
The power dissipated through the cables is calculated as
[tex]P_{diss}=I^2 R = (\frac{P}{V} )^2 R[/tex]
where I is the current and V the voltage.
As it  can be seen, using higher voltages reduce the amount of power dissipated through the lines (while using higher currents will have the opposite effect).

Which of the following could you do to increase the strength of an electromagnet? decrease the number of windings
decrease the electric current
change the core from wood to iron
all of the above

Answers

To INcrease the strength of an electromagnet ...

... INcrease the number of windings
... INcrease the electric current (by increasing the voltage of the battery)
... change the core from wood to iron

change the core from wood to iron

Everything we know about stars comes from studying their _____.

mass
color
temperature
radiation/light
age

Answers

Light / Radiation. The light radiation defines its color. Thermal radiation for its temperature and the overall appearance of the wavelengths the star emits gives off the info from where astronomers and scientist are able to build up knowledge on the age and current state of the stars

Everything we know about stars comes from studying their radiation/light. By measuring the wavelength or frequency of light coming from objects in the universe, we can learn something about their nature.  Starts emit a range of wavelengths. The frequency of light is directly related to its color, so it follows that stars have different colors because they have different peak wavelengths of light.

How do scientists detect the various electromagnetic waves coming from space?

Answers

The electromagnetic spectrum defines all the wavelengths of light. Scientist uses different kinds of telescopes sensitive to different wavelengths of the spectrum. Large infrared telescopes are used to view the core of our galaxy. Moreover, radio telescopes are used to map the structure of our galaxy while microwave telescopes captures the remnant glow of the Big Bang.

Why is it important to make healthy choices about your diet and exercise?

Answers

I believe it's good because it benifits your body, and it helps the decisions you make. Yoru diet is important because you want to control what you eat. If you eat everything you see that is not going to be good in your adult years. Excersise is good to stay fit, and help work off that extra food you do eat. Overall it's good for your body, mind, and helps reduce the risk of hear disease and cancer. And those do play a big role.
~Deceptiøn

Final answer:

Regular exercise, combined with a healthy diet, offers a myriad of health benefits, from disease prevention to cognitive enhancement.

Explanation:

Regular physical exercise is essential in preventing various diseases such as cardiovascular disease, cancer, diabetes, and obesity. Muscle health and strength significantly improve with consistent exercise.

When combining exercise with a healthy diet, individuals are less likely to be obese and experience benefits such as improved cardiovascular health, lowered blood pressure, enhanced diabetes management, joint flexibility, and muscle strength.

Exercise not only influences physical health but also slows cognitive impairments associated with aging, showcasing the holistic benefits of staying physically active throughout life.

How much work can a 23,000 Watt car engine do in 35 seconds if it is 100% efficient?

Answers

Power = Work / Time in cases where there is 100% efficiency. 

Our given power is 23,000 Watts, and our time is 35 seconds.

23,000 Watts = Work / 35 seconds

We multiply both sides by 35 seconds to get...

805,000 Joules of work (since Watts x seconds = Joules)

A skier is gliding down a slope at a constant speed. what energy transformation is taking place?

Answers

In this process, gravitational potential energy is converting into heat/thermal energy.

In fact, the skier starts at a certain height h, so it has gravitational potential energy equal to
[tex]U=mgh[/tex]
as he slides down, he loses this energy. However, the problem says that the speed of the skier remains constant during the motion, so this energy is not converting into kinetic energy, which remains constant. The only possibility is that a frictional force between the skier and the ice is acting on the skier. When the friction acts, the energy of the skier is converted into motion of the molecules of the ice, heating it, so into thermal energy.

When the skier is gliding down a slope at a constant speed the Potential energy is transformed into heat energy.

What will be the energy transformation of a skier sliding at constant speed?

We know that energy can not be created nor be destroyed but only can transfer from one form to another.

A skier is gliding down a slope at a constant speed the gravitational potential energy due to height is converting into heat because of the frictional force.

Since the skier is making a constant speed so the Potential energy will not convert into kinetic energy.

So due to the friction between the ice and the skier the energy converts in the form of heat and dissipated to the ice

Thus when the skier is gliding down a slope at a constant speed the Potential energy is transformed into heat energy.

To know more about Energy follow

https://brainly.com/question/24933254

What causes the curved path of a projectile??

Answers

the combination of initial forward velocity and downward vertical force of gravity

The curved path of a projectile, known as its trajectory, is primarily due to the influence of gravity, along with other factors such as air resistance and the rotation of the Earth.

Gravity: The dominant force acting on a projectile is gravity, which pulls the object downward toward the center of the Earth. As a projectile moves forward, gravity pulls it down, causing it to follow a curved path rather than a straight line. The motion creates a parabolic trajectory when air resistance is negligible.

Initial Velocity and Launch Angle: When a projectile is launched, it has an initial velocity and is given a specific angle with respect to the horizontal. These factors contribute to how high and how far the projectile will travel.

Air Resistance: In real-world scenarios, air resistance also plays a significant role in shaping the projectile's path. This force opposes the motion of the projectile and causes deviations from the ideal parabolic path. The effect of air resistance can be complex and often results in a more flattened trajectory.

What is the gravitational potential energy of a 65.7 kg person standing on the roof of a 135 meter building?

Answers

The gravitational potential energy of a 65.7 kg person standing on the roof of a 135 meter building is 86,752.17 Joules, calculated using the formula PEg = mgh.

The gravitational potential energy (PEg) of a person or object is calculated using the formula PEg = mgh, where m is the mass in kilograms, g is the acceleration due to gravity (9.8 m/s² on Earth), and h is the height above a reference point in meters.

In the case of a 65.7 kg person standing on the roof of a 135 meter building, the gravitational potential energy can be calculated as follows:

PEg = mgh = (65.7 kg) (9.8 m/s²) (135 m) = 86,752.17 Joules

Hence, the person has a gravitational potential energy of 86,752.17 J when standing on the roof of the building.

If a substance is in the gas phase, which of qualities of the gas will stay constant?

volume
mass
shape
position of particles

Answers

Volume - hope this helps (:


Answer:

Mass is the right answer

Explanation:

Gas is a state of matter that has no fixed shape and no fixed volume. Gases have lower density than other states of matter, such as solids and liquids. There is a great deal of empty space between particles, which have a lot of kinetic energy. The particles move very fast and collide into one another, causing them to diffuse, or spread out, until they are evenly distributed throughout the volume of the container.

Therefore the only constant property about matter in a gas state is its mass!

The density of silver is 10.5 g cm3. a piece of silver with a mass of 61.3 g would ovvupy a volume of ?

Answers

The relationship between mass m, volume V and density d is:
[tex]d= \frac{m}{V} [/tex]
The silver has density [tex]d=10.5 g/cm^3[/tex], and the mass of the piece of silver is [tex]m=61.3 g[/tex]. Therefore we can calculate its volume using the previous formula:
[tex]V= \frac{m}{d}= \frac{61.3 g}{10.5 g/cm^3}=5.84 cm^3 [/tex]
Final answer:

The volume of a piece of silver with a mass of 61.3g and a given density of 10.5 g/cm³ would be approximately 5.83 cm³.

Explanation:

The subject is about density which is the ratio of the mass of a sample of the substance to its volume. The SI unit for density is the kilogram per cubic meter (kg/m³) or for many situations, the grams per cubic centimeter (g/cm³) for solids and liquids, and grams per liter (g/L) for gases.

Given the density (D) of silver as 10.5 g/cm³ and the mass (m) as 61.3 g, we can use the formula Density = mass/volume or rearranged to Volume = Mass/Density. After inserting the given values into the equation, we get that the Volume (V) would be approximately 5.83 cm³.

Learn more about Density here:

https://brainly.com/question/34199020

#SPJ3

Other Questions
A long commercial that informs or instructs, especially in an original and entertaining manner is known as You complete weekly practice tests for three months before you are scheduled to take the lsat. which method are you using to manage stress? Which response best explains why promoters for the same sigma subunit do not have identical sequences? Consider this painting entitled The Astronomer by Vermeer. What does a close observation of the painting reveal about the astronomer? The room suggests he is confined or imprisoned. The objects in the room suggest he is curious or academic. His clothing suggests he is a modern, twenty-first century individual. His belongings suggest that he lives in poverty. What is the common factor in this group of famous Georgians?A)They were all members of FDR's "Brain Trust" during the New Deal era.B)They all played major roles in the Civil Rights Movement of the 1960s.C)They are all entrepreneurs who started some of the largest Georgia-based corporations.D)They all served as Governors of the state during the Cvil War and Reconstruction eras. Which of these is most responsible for differences from the twentieth century to the twenty- first century?A. Fuel- efficient automobilesB. Solar heating devices C. Student writing skills D. Low- cost computers Arrange the events in chronological order. HEEELLLPPPPP PLEASE Tiles: The EnlightenmentGerman unificationThe Congress of ViennaThe Napoleonic Wars Suppose p(x1) = .75 and p(y2 | x1) = .40. what is the joint probability of x1 and y2? If the prefix con- means with, which bolded word means to make or prepare with? A) We had to stop to ask for directions to the new movie theater. B)The phone connection was not very good. C)Joey asked Chelle to consider her choices carefully. D)Fudge is a confection of milk and sugar boiled to the soft-ball stage. Select all of the following that are true about Mediterranean climate: has wet winters and dry summers is nearer to the equator than tropical areas plants have adapted to extreme rainfall differences is found in southern California One of korean photographer atta kim's influences is ________, which holds that the sacred pervades all things. You walk into an elevator, step onto a scale, and push the "up" button. you recall that your normal weight is 639 n . when the elevator has an upward acceleration of magnitude 2.90 m/s2 , what does the scale read? The scatterplot below shows the number of hours that some high school students spend on working and on video games.Which statement about the scatterplot is true?In general, the number of hours spent working does not affect the number of hours spent on video games.In general, the amount of weekly time spent working is equal to the amount of weekly time spent on video games.As the amount of time spent working increases, the amount of time spent on video games increases.As the number of hours spent working increases, the amount of time spent on video games decreases. Which two minerals are thought to assist with the functions of insulin? iron and copper? Find f '(0.3) for f of x equals the integral from 0 to x of the arccosine of t, dt PLEASE HELP8.03a1. Find the vertices and foci of the hyperbola with equation x squared over nine minus y squared over sixteen = 1. A) Vertices: ( 5, 0); Foci: ( 3, 0)B) Vertices: ( 3, 0); Foci: ( 5, 0)C) Vertices: (0, 3); Foci: (0, 5)D) Vertices: (0, 5); Foci: (0, 3)2. Find the vertices and foci of the hyperbola with equation quantity x minus three squared divided by sixteen minus the quantity of y plus four squared divided by nine = 1. A) Vertices: (7, -4), (-1, -4); Foci: (-2, -4), (8, -4)B) Vertices: (-4, 7), (-4, -1); Foci: (-4, -2), (-4, 8)C) Vertices: (6, -4), (0, -4); Foci: (0, -4), (6, -4)D) Vertices: (-4, 6), (-4, 0); Foci: (-4, 0), (-4, 6)3. Graph the hyperbola with equation A horizontal hyperbola is shown on the coordinate plane centered at, negative one, four, with vertices at, negative four, negative four and two, negative four. = 1. A) A vertical hyperbola is shown on the coordinate plane centered at the origin with vertices at, zero, two and zero, negative two.B) A horizontal hyperbola is shown on the coordinate plane centered at, negative three, three, with vertices at, negative five, three and negative 1, three.C) A vertical hyperbola is shown on the coordinate plane centered at, three, negative three, with vertices at, three, negative one and three, negative five.D) A horizontal hyperbola is shown on the coordinate plane centered at the origin with vertices at, negative two, zero and two, zero.4. Find an equation in standard form for the hyperbola with vertices at (0, 2) and foci at (0, 7). A) y squared over forty nine minus x squared over four = 1B) y squared over forty five minus x squared over four = 1C) y squared over four minus x squared over forty nine = 1D) y squared over four minus x squared over forty five = 15. Find an equation in standard form for the hyperbola with vertices at (0, 6) and asymptotes at y = three divided by four times x.. A biologist studied the populations of common guppies and Endler's guppies over a 6-year period. the biologist modeled the populations, in tens of thousands, with the following polynomials where x is time, in years.common guppies: 3.1x^2+6x+0.3Endler's guppies: 4.2x^2-5.2x+1what polynomial models the total number of common and Endler's guppies Match the vocabulary word with its meaning. 1. domesticate to tame wild plants or animals 2. agrarian a word that is used to describe settled communities or societies 3. society a word that is used to describe societies that are built around agriculture 4. culture all the knowledge and values shared by society 5. sedentary a group of people with common practices, activities, and interests In what ways can it be argued that the formation of the european union resulted from the world wars 1 and 2 The construction of the Aswan High Dam was beneficial to the people of Egypt, and it caused no negative effects. true or false