Which of the two substances would have the higher boiling point ch4 or c?

To find the  moles equivalent to 2.50x10²⁰ atoms of Fe, you divide the given number of atoms by Avogadro's number (6.022x10²³ atoms/mole). This yields approximately 0.415 moles of Fe.

To calculate the number of moles equivalent to 2.50x10²⁰ atoms of Fe (Iron), you can use Avogadro's number, which is 6.022x10²³ atoms/mole. Let's divide the given no. with Avogadro's number. Let's do the computation:

2.50x10²⁰ atoms Fe * (1 mol Fe / 6.022x10²³ atoms Fe) = ~0.415 moles of Fe

This means that 2.50x10²⁰ atoms of Fe is equivalent to 0.415 moles. Avogadro's number is a fundamental constant in chemistry and is used to convert between the atomic scale and macroscopic scale.

https://brainly.com/question/33720401

#SPJ12

2.50x10^20 atoms of Fe are equivalent to approximately 4.15x10^-4 moles. This is calculated by dividing the number of atoms by Avogadro's number (6.022x10^23 atoms per mole).

To calculate how many moles are equivalent to 2.50x10^20 atoms of Fe, we use Avogadro's number, which states that one mole of any substance contains 6.022x10^23 elementary entities (like atoms). Therefore, to convert the number of atoms to moles, we divide the number of atoms by Avogadro's number.

In this case, (2.50x10^20) / (6.022x10^23), which equals approximately 4.15x10^-4 moles of Fe.

https://brainly.com/question/8512069

#SPJ12

To find the number of atoms in 0.530 g of P2O5, you calculate the number of moles by dividing by the molar mass and then multiply by Avogadro's number, resulting in approximately 2.25 × 1021 atoms.

To determine the number of atoms in 0.530 g of P2O5, we need to calculate the number of moles and then multiply by Avogadro's number (6.022 × 1023 atoms/mol). The molecular weight of P2O5 is found by adding the atomic weights of its constituent atoms: 2P (2 × 30.973761 amu/atom) + 5O (5 × 15.9994 amu/atom), which gives us approximately 141.94 amu. Since molar mass is the mass of one mole of a substance, we can say P2O5 has a molar mass of about 141.94 g/mol.

Now, to find moles, we divide the given mass by the molar mass:
0.530 g / 141.94 g/mol = 0.00373 mol.
Next, we multiply the moles by Avogadro's number to get the total atoms:
0.00373 mol × 6.022 × 1023 atoms/mol = 2.25 × 1021 atoms.

Answer: water and ammonia or (NH3)

By dissolving 8.56 g of sodium acetate in 750.0 mL of water, we find the molarity of the solution to be 0.1391 M. This calculation involves determining the number of moles and the volume in liters. Dividing the moles of solute by the volume of solution gives the molarity.

To find the molarity of a solution made by dissolving 8.56 g of sodium acetate in water and diluting to 750.0 mL, you first need to determine the number of moles of sodium acetate. The molar mass of sodium acetate (CH3COONa) is 82.03 g/mol.

Number of moles = mass / molar mass

Number of moles = 8.56 g / 82.03 g/mol = 0.1043 moles

Next, convert the volume of the solution from mL to L:

Volume = 750.0 mL = 0.750 L

Finally, calculate the molarity (M) of the solution:

M = moles of solute / liters of solution

M = 0.1043 moles / 0.750 L = 0.1391 M

Therefore, the molarity of the solution is 0.1391 M.

About 15.20g of silver would have to be dissolved in 1120 g of ethanol to lower the freezing point by 0.25°C.

To find out how many grams of silver need to be dissolved in 1120 g of ethanol to lower its freezing point by 0.25°C, we can use the formula for freezing point depression:

[tex]\Delta T_f = K_f \cdot m[/tex]

Where:

Step 1: Calculate Molality (m)

Step 2: Calculate Moles of Silver Required

Using the definition of molality:

Thus:

Step 3: Convert Moles to Grams

Therefore, approximately 15.20 grams of silver would need to be dissolved in 1120 g of ethanol to lower the freezing point by 0.25°C.

Boron and Oxygen, due to their similar electronegativity can form a nonpolar covalent bond. This type of bond is formed when electrons are shared equally between atoms. Sodium and Chlorine, with their contrasting electronegativities, would rather form an ionic bond.

The atom pairs that form a nonpolar covalent bond from the options given would be B and O. Boron (B) and Oxygen (O) come from nonmetals with similar electronegativity, hence they share electrons equally forming a nonpolar covalent bond.

Nonpolar covalent bonds form when two atoms share electrons equally, meaning the electrons spend an equal amount of time around each atom. This could involve two atoms of the same element, like O₂, or atoms of different elements with similar electronegativity, like CH4 (methane).

On the contrary, atoms like Sodium (Na) and Chlorine (Cl), have a large difference in electronegativity, leading to an ionic bond instead of a covalent bond. In such cases, a clearly positive (cation) or negative (anion) charge develops on the atoms.

https://brainly.com/question/14470991

#SPJ6

The correct answer is: E) None of the above  atoms form a nonpolar covalent bond.

For a nonpolar covalent bond to form, the atoms involved must have similar electronegativities, typically seen in diatomic molecules of the same element

Given options:

A) Na and Cl - This forms an ionic bond.

B) C and O - This forms a polar covalent bond.

C) N and Cl - This forms a polar covalent bond.

D) B and O - This forms a polar covalent bond.

Full question

Which pair of atoms forms a nonpolar covalent bond?

A) Na and Cl  

B) C and O  

C) N and Cl  

D) B and O

E) None of the above.

Final answer:

Oxidation reactions during the electrolysis of water produce oxygen gas (O₂) at the anode. The process requires an electrolytic cell with an electrolyte such as sulfuric acid to facilitate the reaction, and it results in a stoichiometric ratio with twice the volume of hydrogen gas produced compared to oxygen gas.

Explanation:

During the electrolysis of water, oxidation reactions occur at the anode, producing oxygen gas (O₂). The reaction involves water molecules losing electrons to form oxygen gas and hydrogen ions. The overall chemical reaction for the oxidation process at the anode can be represented as 2H₂O(l) → O₂(g) + 4H⁺ + 4e⁻. Oxygen gas is released at the anode, while hydrogen gas is produced at the cathode.

In an electrolytic cell with platinum electrodes and an electrolyte like sulfuric acid (H₂SO₄), water undergoes electrolysis to form these gases. It's worth noting that there are twice as many hydrogen atoms as oxygen atoms, and because they are both diatomic (exist as H₂ and O₂), twice the volume of hydrogen gas is produced compared to oxygen gas. This stoichiometric relationship is essential for understanding the mass and volume ratios of the gases produced during water electrolysis.

Answer:

Geiger counter and scintillation counter

Explanation:

The Geiger counter was invented by Hans Geiger in 1908 to measure the levels of radiation in bodies and the environment, so it is one of the indispensable equipment for the inspector to detect radiation leaks in a nuclear power plant. It contains a tube with argon, which ionizes by being crossed by alpha and beta particles of radiation, closing the electric circuit and triggering the counter.

Similarly, a scintillation detector is an apparatus used to detect ionizing radiation. When something in the environment has been reached by radiation, this detector emits a small ray of light, indicating the radiation contamination.

Answer:

A. Geiger counter and scintillation counter

Explanation:

The answer is true. I just had this question on a test and I got it wrong for saying false.

Explanation:

Longest wavelengths of light that can cleave the bonds in elemental nitrogen

Energy to cleave 1 mol N-N bond = 945 kJ/mol = 945000 J/mol

1 mol= [tex]6.022\times 10^{23}[/tex]

Energy to break 1  N-N bond = [tex]\frac{945000 J/mol}{6.022\times 10^{23} mol^{-1}}=1.56\times 10^{-18} J[/tex]

[tex]E=\frac{hc}{\lambda }[/tex]

[tex]\lambda =\frac{6.626\times 10^{-34}J s\times 3\times 10^{8} m/s}{1.56\times 10^{-18} J}=12.74\times 10^{-8} m=127.4 nm[/tex]

Longest wavelengths of light that can cleave the bonds in elemental nitrogen is 127.4 nm.

Similarly

For oxygen:

Energy to cleave 1 mol O-O bond = 498 kJ/mol = 498000 J/mol

Energy to break 1  O-O bond = [tex]\frac{498000 J/mol}{6.022\times 10^{23} mol^{-1}}=8.26\times 10^{-19} J[/tex]

[tex]E=\frac{hc}{\lambda }[/tex]

[tex]\lambda =\frac{6.626\times 10^{-34}J s\times 3\times 10^{8} m/s}{8.26\times 10^{-19} J}=2.406\times 10^{-7}m=240.6 nm[/tex]

Longest wavelengths of light that can cleave the bonds in elemental oxygen is 240.6 nm.

For fluorine

Energy to cleave 1 mol F-Fbond = 159 kJ/mol = 159000 J/mol

Energy to break 1  F-F bond = [tex]\frac{159000 J/mol}{6.022\times 10^{23} mol^{-1}}=2.64\times 10^{-19} J[/tex]

[tex]E=\frac{hc}{\lambda }[/tex]

[tex]\lambda =\frac{6.626\times 10^{-34}J s\times 3\times 10^{8} m/s}{2.64\times 10^{-19} J}=7.529\times 10^{-7}m=752.9 nm[/tex]

Longest wavelengths of light that can cleave the bonds in elemental fluorine is 752.9 nm.

Mechanical waves require a medium to travel. If there is no medium, the mechanical wave doesn't travel. Since, they are waves; they have a wavelength, frequency, speed and also amplitude. The speed depends on the medium and type of the wave. An example for the mechanical waves is sound wave.

2. E = hf, where E is energy, h is plank constant and f is the frequency. Hence, if the frequency is high, then the energy is high. 

v = fλ , where v is the speed, f is the frequency and λ is the wavelength. If the frequency is high, then the wavelength is low.

According to the given choices, gamma rays have the shortest wavelength and highest energy on electromagnetic spectrum.

3. The wavelength of X-rays are smaller the wavelength of infrared.

According to the v=fλ, lower the wavelength, then higher the frequency.  According to the E = hf, if the frequency is high, then the energy is also high. 

Hence, the correct answer is "d"

4. In a longitudinal wave (compression wave) the particles of a matter move parallel. 

There are two types of waves according to the particle movement. They are transverse waves and longitudinal waves. In transverse waves, the particles of the medium move perpendicular to the direction of the wave and longitudinal waves have parallel movement of particles to the direction of wave.

5. In regard to spend of sound, sound travels slowest in gases.

Solids have the highest speed of sound while gases have the lowest. This is because of the particle arrangement of each phase. Solid phase has very tightly packed particle arrangement and due to that the transfer of sound wave in easy than in gases.

A 3.1 L sample of hydrogen at the same temperature and pressure as 0.20 mol of CO₂ will also contain 0.20 mol of hydrogen.

To answer the question, we need to understand the relationship between volume, temperature, and pressure for gases, as explained by the Ideal Gas Law.

The Ideal Gas Law is given by the equation PV = nRT, where P is pressure, V is volume, n is the number of moles, R is the gas constant, and T is temperature in Kelvin.

Since we are told that the volume sample of hydrogen is at the same temperature and pressure as the carbon dioxide, we can directly relate the two based on their moles.

For carbon dioxide (CO₂):

n = 0.20 mol

V = 3.1 L

This relationship tells us that 0.20 moles of CO₂ occupies 3.1 L at the given temperature and pressure.

Applying the same conditions to hydrogen (H₂), a 3.1 L sample of hydrogen gas will contain the same number of moles as the CO₂ under the same conditions:

0.20 mol of Hydrogen (H₂)

Therefore, 3.1 L of hydrogen at the same temperature and pressure will also contain 0.20 mol of hydrogen gas.

Answer :  The total number of molecules in 0.5 mole of sample of He gas are, [tex]3.011\times 10^{23}[/tex]

Explanation : Given,

Moles of sample of He gas = 0.5 mole

As we know that,

1 mole of gas contains [tex]6.022\times 10^{23}[/tex] number of molecules of gas

As, 1 mole of He gas contains [tex]6.022\times 10^{23}[/tex] number of molecules of He gas

So, 0.5 mole of He gas contains [tex]0.5\times (6.022\times 10^{23})=3.011\times 10^{23}[/tex] number of molecules of He gas

Therefore, the total number of molecules in 0.5 mole of sample of He gas are, [tex]3.011\times 10^{23}[/tex]

Answer;

-past temperatures

The ratio of oxygen-16 and oxygen-18 isotopes in plankton fossils in deep-sea sediments can be used to determine past temperatures.

Explanation;

-O-16 will evaporate more readily than O-18 since it is lighter, therefore; during a warm period, the relative amount of O-18 will increase in the ocean waters since more of the O-16 is evaporating.

-Hence, looking at the ratio of O16 to O18 in the past can give clues about global temperatures.

For the reaction a(g) + 2b(l) = 4c(g) + d(g), the equilibrium constant expression using partial pressures, Kp, is Kp = (Pc)^4 (Pd) / (Pa).

To write the equilibrium-constant expression, Kp, for the reaction a(g) + 2b(l) = 4c(g) + d(g), we apply the principles of equilibrium for gases. Kp is an equilibrium constant calculated from partial pressures of gas-phase reactants and products at equilibrium. The liquids are not included in the Kp expression since their activities are considered constants under standard conditions and do not affect the equilibrium of gases.

The general form of an equilibrium constant expression for a reaction is Kp = (Pc)c (Pd)d / (Pa)a (Pb)b, where P represents the partial pressure of each gas, the lower-case letters right below the P are the chemical species, and the upper-case letters indicate the stoichiometric coefficients from the balanced equation.

Using the reaction given, we write the Kp expression as follows:

Kp = (Pc)4 (Pd) / (Pa)

Note that in our Kp expression, we do not include B since it is in the liquid state.

The population of the planet is constantly increasing, and this growth can have many effects on the environment and the economy of the world. For example, as the world population rises, the pressure mounts on the agricultural sector to feed the millions of extra mouths. In predicting the rise of the world population, scientists use a number of variables.

Fertility Rate

The factor which affects the growth of the population in the biggest way is the fertility rate. The fertility rate is typically measured by the number of children per one woman of child-bearing age. If the fertility rate is larger than 2, the rule of thumb is that the population should rise, as there are more children than their parents. On the other hand, if this ratio is below 2, the population of the region may be destined for a decline.

Mortality Rate

A key factor affecting the growth of the population is the death, or mortality, rate. Just as the birth of new people increases the population size, deaths decrease it. The factors that affect the mortality rate include the availability and affordability of quality health care and lifestyle habits – for example, whether they smoke or do physical exercises regularly.

Immigration and Emigration

Cross-border migration is the act of people moving from one country to another. It affects the population size of both the host and destination countries. Emigration is caused by a number of factors, such as fleeing war, finding education, seeking new jobs or joining family members. When a person emigrates from a country, its population shrinks. When someone moves to a country from another place, it is known as immigration. Whether or not a person is allowed to immigrate is controlled by the country that will host this person.

Government Restrictions

There are some people in the world, including politicians, who believe that some countries need to have a birth rate restriction -- in fact, China already has its widely-known one-child policy. Such a restriction would prevent couples from being able to have more than the restricted amount of children. The argument goes that this type of restriction would cause fewer resources to be used and prevent overpopulation.

Population growth rate is affected by several factors, including the birth and death rates, life expectancy, and the age structure of the population. Other factors include human migration and improvements in public health and sanitation.

A major factor affecting population growth rate is the birth and death rates. When birth rates exceed death rates, population size increases. Conversely, when death rates exceed birth rates, population size decreases. Life expectancy also plays an important role. The length of time individuals remain in the population impacts local resources, reproduction, and the overall health of the population.

Another factor is related to the age structure of a population, which is the proportion of a population in different age classes. Rapid growth countries often have a pyramidal age structure, showing many young, reproductive-aged individuals. On the other hand, areas with slow growth or zero growth tend to have a greater proportion of older individuals.

Additionally, other factors affecting human population growth include migration and improvements in public health and sanitation. The development and use of antibiotics and vaccines have decreased the prevalence of infectious disease, allowing human population to grow.

https://brainly.com/question/16013460

#SPJ2

Here we have to judge the statement about the hydrogen bond is true or false for water molecule.

The both the statement about hydrogen bonding in water is true i.e. The water molecule can act as hydrogen-bond donor and acceptor.

The hydrogen bond is a weak interaction between a hydrogen atom and an electronegative atom.

In water (H₂O) there remains hydrogen atom (H) and also the electronegative atom oxygen (O). The donor property and acceptor property to produce hydrogen bond in water is shown in figure.

The donor and acceptor property of water is shown in the figure.

The correct answer is true.

Hope this helps! ;)

Activation energy simply means the minimum amount of energy needed for the particles to have a successful reaction when they collide. There are two basic factors necessary for a reaction to just take place.

In the following reaction, the nitrogen is reduced.
2Cu2O + 2NO → 4CuO + N2

Answer:

The rate would be one-fourth. I just did it

Explanation:

When a strong monoprotic acid is Titrated with a weak base at 25° ;

A monoprotic acid donates only a single proton in a titration experiment therefore at the equivalence point in an experiment involving the reaction between the strong monoprotic acid with a weak base, all the base ions will react, while the strong acid will have some unreacted ions  ( H⁺) left in the solution.

The unreactive protons of the strong monoprotic acid present in the solution will make the solution acidic therefore the pH of the solution will be less than 7 at the equivalence point.

Hence we can conclude that when a strong monoprotic acid is titrated with a weak base at 25°, the pH will be less than 7 at the equivalence point.

Learn more : https://brainly.com/question/22763666

Final answer:

In a titration of a monoprotic strong acid with a weak base, the pH will be less than 7 at the equivalence point because the conjugate acid of the weak base will slightly ionize, rendering the solution acidic at this point.

Explanation:

When titrating a monoprotic strong acid with a weak base at 25°C, the pH at the equivalence point will be less than 7. This is because the reaction at the equivalence point produces the conjugate acid of the weak base, which slightly ionizes in solution, contributing to an acidic pH. As outlined in resources such as LibreTexts, the equivalence point's pH depends on the strength of the acid and base involved in the titration. In the case of a strong acid with a weak base, the solution will be acidic because the weak base is not strong enough to fully neutralize the strong acid. Therefore, the correct answer to the question is a. pH will be less than 7 at the equivalence point. It is also important to note that the number of moles of base and acid required to reach the equivalence point depends solely on their stoichiometry and not on their strength, meaning one mole of acid will react with one mole of base to reach the equivalence point.

In order to balance the equation, we identify the oxidation and reduction half-reactions and then combine them. The smallest possible integer coefficient of O₂ in the balanced equation is 10.

To balance the given equation cl2o7(g) + h2o2(aq) → clo− 2 (aq) + o2(g), we first have to identify the oxidation and reduction half-reactions. The oxidation half-reaction is: Cl₂O₇ → 2ClO₂⁻ + 5/2O₂. The reduction half-reaction is: H₂O₂ + 2e⁻ → 2OH⁻. Then, we combine the oxidation and reduction half-reactions: 4 Cl₂O₇ + H₂O₂ → 8 ClO₂⁻ + 2OH⁻ + 10O₂. The smallest possible integer coefficient of O₂ in the combined balanced equation is 10.

https://brainly.com/question/13978139

#SPJ12

The process of balancing redox reactions involves separating the reaction into two half-reactions, balancing them individually, and then combining them to ensure the total charges cancel out. In the given reaction, Cl2O7(g) + H2O2(aq) → ClO2−(aq) + O2(g), the smallest possible integer coefficient of O2 is 1 as one molecule of H2O2 produces one molecule of O2.

To balance the given redox reaction, Cl2O7(g) + H2O2(aq) → ClO− 2(aq) + O2(g), we split into two half-reactions, one for oxidation, and one for reduction. Assign oxidation numbers to identify which atoms have changed oxidation state during the reaction. The oxidation half-reaction can be identified as H2O2(aq) → O2(g) and the reduction half-reaction as Cl2O7(g)  → ClO− 2(aq).

Balance each of these half-reactions, first for atoms other than hydrogen and oxygen, then for oxygen, then for hydrogen, and lastly for charge. After balancing the half-reactions individually, combine them ensuring the total charges cancel out. The smallest integer coefficient of O2 in balanced equation results from the oxidation half-reaction, where one molecule of H2O2 produces one molecule of O2, thus the smallest possible integer coefficient of O2 is 1.

https://brainly.com/question/31991118

#SPJ11

Answer is: the freezing point of the solution of glucose is -1.26°C and boiling point is 100.353°C.
m(H₂O) = 455 g ÷ 1000 g/kg = 0.455 kg.
m(C₆H₁₂O₆) = 55.8 g. 

n(C₆H₁₂O₆) = m(C₆H₁₂O₆)÷ M(C₆H₁₂O₆).
n(C₆H₁₂O₆) = 55.8 g ÷ 180.16 g/mol.
n(C₆H₁₂O₆) = 0.31 mol.
b(solution) = n(C₆H₁₂O₆) ÷ m(H₂O).
b(solution) = 0.31 mol ÷ 0.455 kg.
b(solution) = 0.68 mol/kg.
ΔTf = b(solution) · Kf(H₂O).
ΔTf = 0.68 mol/kg · 1.86°C·kg/mol.

ΔTf = 1.26°C.
Tf = 0°C - 1.26°C = -1.26°C.

ΔTb = b(solution) · Kb(H₂O).

ΔTb = 0.68 mol/kg · 0.52°C·kg/mol.

ΔTb = 0.353°C.

Tb = 100°C + 0.353°C.

The boiling point of the solution is 100.35 °c.

We know that;

ΔT = K m i

ΔT = freezing point depression

K = freezing constant

m = molality

i = Van't Hoff factor

Hence;

ΔT =  1.86°c kg/mol × 55.8 g/180 g/mol × 1/0.455 × 1

ΔT = 1.27 °c

Freezing point = 0 - 1.27 °c = - 1.27 °c

For boiling point;

ΔT = K m i

ΔT = 0.512 o c kg × 55.8 g/180 g/mol × 1/0.455 × 1

ΔT = 0.35 °c

Boiling point = 100 +  0.35 °c = 100.35 °c

Learn more about freezing point: https://brainly.com/question/2292439